Strain BS8Y with high biodegradation activity and high tolerance of phenol was isolated from activated sludge in an insulating material plant of China. This strain was capable of removing 99.2% of the initial 600 mg/l phenol in liquid minimal medium within 24 h and tolerating phenol at concentrations of up to 1,200 mg/ml. DNA sequencing and homologous analysis of the 16S rRNA gene identified that the strain BS8Y belonged to an Acinetobacter species. Polyvinyl alcohol was used as gel matrix to immobilize the strain BS8Y. The factors affecting the phenol degradation by immobilized cells and the phenol removal efficiency of free and immobilized cells were investigated; the stability of the immobilized cells is also reported. The results show that the immobilized cells could tolerate a higher phenol level and protected the bacteria much more effectively against changes in temperature and pH. The phenol degradation efficiency was high at up to 96% within 30 h, with an initial concentration of 800 mg/l phenol, and the immobilized cells showed better performance than the suspended cells. Reusability tests revealed that the immobilized cells were stable enough even after reuse for ten times or storing at 4°C for 35 d. These results demonstrate that immobilized Acinetobacter sp. BS8Y possesses a good application potential in the treatment of phenol-containing wastewater.

No abstract

No abstract

Acid mine drainage(AMD) is one of the main reasons of slope instability in chemical mines with high sulfide. The pH values of the solution inside the mining pit decrease with the increasing of distance from ore body and vary from 1.2 to 4.6, according to the results of the water environmental investigation and the composition test of the slope sandstone in Xinqiao Pyrite Mine. Comparative experiments between original sandstone and AMD eroded sandstone samples show that after AMD erosion the uniaxial compressive strength and elastic modulus decrease by 30%−50% and 25%−45%, respectively, the cohesion and internal friction angle decrease obviously, and the Poisson ratio fluctuates between 0.20−0.29. The greater joints development, the higher residual stress after peak value, and the longer time to damage. Besides above, the reaction mechanism analysis of AMD eroded sandstone shows that the fillings in joints and fissures of sandstone are frequently decomposed and polyreacted, resulting in changes of interior molecule structure and framework composition, and decreases of cohesion and angle of internal friction between rock structure interfaces.

No abstract