Three-dimensional (3D) conductive aerogels with structural robustness and mechanical resilience are highly attractive for sensitive and stable pressure sensing. However, the fabrication of such 3D aerogels often relies on complicated bottom-up assembly processes that involve costly raw materials or intensive energy consumption or directly coating synthetic polymer sponges (e.g., polyurethane) with conductive materials, which may pose environmental concerns for their disposal. Herein, a simple and sustainable strategy is proposed to fabricate a reduced graphene oxide-coated wood sponge (RGO@WS) with a lamellar structure for high-performance piezoresistive sensors. The introduced RGO nanosheets endow the RGO@WS not only with high conductivity but also with high elasticity and excellent fatigue resistance. These features make it an ideal piezoresistive sensor with a high sensitivity of 0.32 kPa–1 (superior to most polymeric sponge-based sensors), high working stability over 10 000 cycles, and excellent sensing reproducibility at ultralow temperatures. Thanks to its prominent sensing performance, the RGO@WS-based sensor can serve as a wearable device for detecting human motions and physiological signals and allows for spatially resolved pressure mapping via integrating the sensors into a large-area sensing array. The developed highly elastic and fatigue-resistant RGO@WS represents a promising and sustainable alternative to the synthetic polymer-based piezoresistive sensors.

Moso bamboo (Phyllostachys pubescens Mazei ex H. de Lebaie), one of the most commonly used species in China, is a strong and stiff material. In this paper, the manufacturing process for glued bamboo laminate (GBL) is presented. The mechanical properties of GBL (compression strength, bending, tension, and shearing) were tested. Results indicated that the mechanical properties of GBL were significantly different for different grades of GBL, but that the performance of GBL was controllable. The edge butt joint greatly influenced the tensile performance, but the butt joint had little impact on the bending performance. In addition, the good mechanical performance of GBL is sufficient for engineering members, making it a potentially useful bamboo product for engineering.

This study aimed to improve straw-based fiberboard properties without resins by adding pulping effluent as well as to investigate the difference among boards under variable hot-pressing temperatures. The characterization of fiberboards produced from wheat straw under pressing temperatures ranging from 160 to 200 °C was first described. The surface appearance, surface chemistry, thermal transitions, and mechanical performance of the boards were evaluated to investigate the effect of varying hot-pressing temperature. The results indicated that the surface color of boards became darker when the temperature was above 190 °C. Additionally, Fourier transform infrared (FT-IR) measurements showed that more low-molecular constituents and hydrogen bonds were produced under higher pressing temperatures. Furthermore, the physical and mechanical property data were analyzed statistically using one-way analysis of variance (ANOVA) and Tukey’s tests (α = 0.05). The results demonstrated that straw-based fiberboards with effluent under 190 °C exhibited superior strength and water resistance capacities, and showed great potential in commercial decorating and packaging applications.