No abstract

No abstract

Abstract. Glass fibres have the principal advantages such as high tensile strength, high chemical resistance, low cost, and excellent insulating properties which makes them an important constituent in fibre reinforced plastic and composite industry. In this study, E-glass fibre in the form of Chopped Strand Mat (CSM) with different weight fractions such as 15%, 30%, and 45% were used as reinforcement in CNSL-epoxy resin composites. Fabrication of the composites was done by hand layup technique. Micro-hardness, tensile and flexural properties were investigated for all the composite panels of different compositions. The results clearly indicated an improvement in micro hardness, tensile and flexural properties with the increase in fibre content.

No abstract

Abstract. The need to have biodegradable composites is aloft in today's market as they are environment friendly and are also easy to fabricate. In this study, mangifera indica leaf stalk fibres were used as reinforcement along with saw dust as bio-filler material. Unsaturated isophthalic polyester resin was used as the matrix. The fibres were treated with 6 % vol. NaOH and neutralized with 3 % vol. of dilute HCl. Treatment of sawdust fillers was done by using 2% vol. NaOH solution. Hand layup method and compression moulding technique was used to fabricate the composite laminates. Specimens for evaluating the mechanical properties were prepared by using water jet machining. The results indicated an increase in tensile, flexural and impact strength of composites with addition of sawdust upto 3%. Further addition of the bio-filler resulted in decrease of mechanical properties.