The fate of pesticides in aquifers is influenced by the small but not insignificant adsorption of pesticides to mineral surfaces. Batch experiments with five pesticides and four minerals were conducted to quantify the contributions to adsorption from different mineral surfaces and compare adsorption characteristics of selected pesticides. Investigated mineral phases included quartz, calcite, kaolinite, and alpha-alumina. Selected pesticides comprised atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine), isoproturon [3-(4-isopropylphenyl)-1,1-dimethylurea)], mecoprop [(RS)-2-(4-chloro-2-methylphenoxy)propionic acid], 2,4-D (2,4-dichlorophenoxyacetic acid), and bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4-(3H)-one 2,2-dioxide]. Specific surface area and mineral surface charge proved to be important for the adsorption of these pesticides. Detectable adsorption of the anionic pesticides (mecoprop, 2,4-D, and bentazone) was only measured when positive sites were present on the mineral surface. However, when CaCl2 was added as an electrolyte, a detectable adsorption of mecoprop and 2,4-D was also measured on kaolinite (which exhibits a negative surface charge), probably due to formation of Ca-pesticide--surface complexes. Adsorption of the uncharged pesticides (atrazine and isoproturon) was detected only on kaolinite. The lack of adsorption on alpha-alumina indicates that the uncharged pesticides have a greater affinity for the silanol surface sites (=SiOH) than for the aluminol surface sites (=AlOH) in kaolinite. No measurable effect of ionic strength was found for the uncharged pesticides. The results indicate that quartz and calcite play a smaller role than clay minerals.

Iron oxides are important components influencing the adsorption of various inorganic and organic compounds in soils and sediments. In this study the adsorption on iron oxides of nonionic and ionic pesticides was determined as a function of solution pH, ionic strength, and pesticide concentration. The investigated iron oxides included two-line ferrihydrite, goethite, and lepidocrocite. Selected pesticides comprised atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine), isoproturon [3-(4-isopropylphenyl)-1,1-dimethylurea)], mecoprop [(RS)-2-(4-chloro-2-methylphenoxy)propionic acid], 2,4-D (2,4-dichlorophenoxyacetic acid), and bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one 2,2-dioxide]. The adsorption of the nonionic pesticides (atrazine and isoproturon) was insignificant, whereas the adsorption of the acidic pesticides (mecoprop, 2,4-D, and bentazone) was significant on all investigated iron oxides. The adsorption capacity increased with decreasing pH, with maximum adsorption reached close to the pKa values. The addition of CaCl2 in concentrations from 0.0025 to 0.01 M caused the adsorption capacity to diminish. The adsorption of bentazone was significantly lower than the adsorption of mecoprop and 2,4-D, illustrating the importance of a carboxyl group in the pesticide structure. The adsorption capacity on the iron oxides increased in the order: lepidocrocite < goethite < two-line ferrihydrite. The maximum adsorption capacities of meco-prop and 2,4-D on goethite were found to be equivalent to the site density of singly coordinated hydroxyl groups on the faces of the dominant (110) form, suggesting that singly coordinated hydroxyl groups are responsible for adsorption. Differences in adsorption capacities between iron oxides can be explained by differences in the surface site density of singly coordinated hydroxyl groups. The maximum measured adsorption capacity of mecoprop on two-line ferrihydrite was equivalent to 0.2 mol/mol Fe.

No abstract

No abstract

The sorption of seven pesticides in 10 Danish aquifer sediments has been studied. These sediments all have a total organic carbon (TOC) content below 1 g kg−1, and include carbonate‐bearing and carbonate‐free Quatenary sand deposits and a Cretaceous chalk aquifer. Batch experiments were carried out with metamitron, atrazine, isoproturon, mecoprop, 2,4‐D, bentazone, and metsulfuron‐methyl at an initial pesticide concentration of 0.25 mg L−1 in ground water. Generally, the sorption decreases in the order: metamitron, atrazine, isoproturon, mecoprop, 2,4‐D, metsulfuron‐methyl. The bentazone sorption was found to be insignificant. For a specific pesticide the sorption covers a range of Kd values (L kg−1) reflecting the different sediment characteristics. Multivariate regression analyses demonstrate that: (i) metamitron sorption is enhanced by increasing content of iron silicates; by contrast the oxalate extractable iron oxides have no influence on the metamitron sorption; (ii) sorption of atrazine, mecoprop, and 2,4‐D depends primarily on pH; the sorption is high at low pH (<6.7) compared with sorption at higher pH (>7.4); (iii) metsulfuron‐methyl only sorbs at pH below 5; and (iv) isoproturon sorption is primarily influenced by the specific surface area (SSA) and TOC. The present results illustrate the importance of choosing sediments of different geological origin in order to describe the influence of sediment properties on pesticide sorption.