Organic materials are suitable for light sensing devices showing unique features such as low cost, large area, and flexibility. Moreover, transparent photodetectors are interesting for smart interfaces, windows, and display-integrated electronics. The ease of depositing ultrathin organic films with simple techniques enables low light absorbing active layers, resulting in the realization of transparent devices. Here, we demonstrate a strategy to obtain high efficiency organic photodetectors and phototransistors based on transparent active layers with a visible transmittance higher than 90%. The photoactive layer is composed of two phases, each a few nanometers thick. First, an acceptor polymer, which is a good electron-transporting material, on top of which a small molecule donor material is deposited, forming noncontinuous domains. The small molecule phase acts as a trap for holes, thus inducing a high photoconductive gain, resulting in a high photoresponsivity. The organic transparent detectors proposed here can reach very high external quantum efficiency and responsivity values, which in the case of the phototransistors can be as high as ∼74000% and 340 A W at 570 nm respectively, despite an absorber total thickness below 10 nm. Moreover, frequency dependent 2D photocurrent mapping allows discrimination between the contribution of a fast but inefficient and highly spatially localized photoinduced injection mechanism at the electrodes, and the onset of a slower and spatially extended photoconductive process, leading to high responsivity.

No abstract

We demonstrate the feasibility of a photodetector based on an ensemble molecular junction, where a self-assembled monolayer of an organic donor-acceptor dye is directly sandwiched between two electrodes. In such a device, upon photoexcitation and generation of a charge-transfer state on the molecule, charges are dissociated and directly collected at the electrodes without the need of transport through a bulk phase, as in usual photodetectors. We show that the device can work in photovoltaic regime and the spectral response can be tuned by varying the light absorbing dye. Therefore, the electro-optical properties of the downscaled device can be unambiguously related to the physical-chemical properties of the molecules, a commonly difficult point to demonstrate in a molecular junction device, because of the uncertainties of the interplay between molecules and electrodes. The proposed device, which relies on a simple self-assembly process, has a strong potentiality for fast responding, downscaled detectors, ultimately limited by charge dissociation dynamics, and can be considered also as a useful tool to investigate fundamental electro-optical processes in molecular monolayers.