No abstract

In this article a study of the energy performance of a distillation system of ylang-ylang essential oil on a wood fire was carried out. To do this an analysis using the first and the second low of thermodynamics was made for each component of the distillation system.  The analysis showed that the energy efficiency depends on the fration of oil to be distilled and that the whole system is very deficient. The exergetic and energetic analysis shows that it is in the combustion chamber that has a large amount of destroyed exergy and a strong energetic loss. The velocity of the air entering at the combustion chamber greatly influences the efficiency of the chamber. Indeed it has been found that the destruction of the exergy increases with the velocity of the air incoming air.

No abstract

No abstract

In the ylang-ylang essential oil distillers in Anjouan Island, the used energy is 100% firewood biomass. A large amount of this energy is dissipated in the environment just in the combustion chamber itself. As it turns out, the flue gases in this process take away the most part of it. Thus, in a process of energy efficiency of stills, the present work aims at assessing the possibility to convert the residual heat from the process into electricity. For that purpose, energy and exergy modeling of an organic Rankine cycle was implemented. It was found that a large amount of exergy is destroyed in the evaporator. Similarly, it emerges that the exergy efficiency of the cycle depends on the inlet temperatures of the exhaust gases in the evaporator and on the inlet pressure of the working fluid in the turbine, and that it is much better for low exhaust gas temperatures. At these low values of gas temperatures, it appears that the improvement in exergy efficiency and energy efficiency are linked to the increase in the inlet pressure of the working fluid in the turbine. It follows from the obtained results that the discharged hot water and the residual heat of gases having temperatures ranging from 180°C to 300 °C, could be used for power production which can reach electrical powers between 1.4kW and 4.5kW