The turbulent Rayleigh–Taylor instability is investigated over a comprehensive range of fluid density ratio (R)1.3⩽R⩽50 [0.15⩽A=(R−1)/(R+1)⩽0.96] and different acceleration histories g(t) using the Linear Electric Motor. The mixing layer is diagnosed with backlit photography and laser-induced fluorescence. For a constant acceleration, the bubble (2) and spike (1) amplitudes are found to increase as hi=αiAgt2 with α2∼0.05±0.005 and α1∼α2RDα with Dα∼0.33±0.05. For temporally varying accelerations Ag(t)>0, this can be generalized to hi=2αiAS using S=[∫gdt]2/2 rather than the displacement Z=∫∫gdt′ dt. For impulsive accelerations, S remains constant during the coast phase and the amplitudes obey a power law hi∼tθi with θ2∼0.25±0.05 and θ1∼θ2RDθ with Dθ∼0.21±0.05. These values of Dα and Dθ compare favorably with numerical simulations and mix models. The average diameter at the mixing front for bubbles is found to increase as d2∼h2(1+A)/4 in qualitative agreement with “merger” models, but the associated dhi/dt is two times larger than the terminal velocity of an isolated bubble. The spikes become relatively narrow at large R, yet they still grow as gt2.

2014 On mesure la corrélation des fluctuations de forme en fonction du temps des grandes (~ 10 03BCm) vésicules semi-sphériques de phospholipides hydratés, vésicules dont les membranes consistent en une ou plusieurs couches bimoléculaires. Ces membranes sont flasques, de sorte que la superficie et le volume de la vésicule sont constants. Ainsi la seule contribution à l'énergie associée à une fluctuation de forme vient de l'excès de courbure d'un élément de la membrane. De l'amplitude moyenne quadratique des modes normaux des fluctuations, on obtient une valeur pour le module d'élasticité de courbure, Kc, en employant le théorème d'équipartition. On trouve une expression pour le temps de corrélation

No abstract

Indirect-drive hohlraum experiments at the National Ignition Facility have demonstrated symmetric capsule implosions at unprecedented laser drive energies of 0.7 MJ. 192 simultaneously fired laser beams heat ignition emulate hohlraums to radiation temperatures of 3.3 million Kelvin compressing 1.8-millimeter capsules by the soft x rays produced by the hohlraum. Self-generated plasma-optics gratings on either end of the hohlraum tune the laser power distribution in the hohlraum producing symmetric x-ray drive as inferred from the shape of the capsule self-emission. These experiments indicate conditions suitable for compressing deuterium-tritium filled capsules with the goal to achieve burning fusion plasmas and energy gain in the laboratory.With completion (1) and commissioning (2) of the National Ignition Facility (NIF) the quest for producing a burning fusion plasma has begun (3, 4). The goal of these experiments is to compress matter to densities and temperatures higher than the interior of the sun (5-7) which will initiate nuclear fusion and burn of hydrogen isotopes (8-10). This technique holds promise to demonstrate a highly efficient carbon-free process that will burn milligram quantities of nuclear fuel on each laser shot for producing energy gain in the laboratory.The NIF (11) consists of 192 laser beams that have been arranged into cones of beams to irradiate a target from the top and bottom hemispheres. This "indirect-drive" laser geometry has been chosen for the first experiments to heat the interior of centimeter-scale cylindrical gold hohlraums (8,(12)(13)(14)(15) through laser entrance holes (LEH) on the top and bottom end of the cylinder (Fig. 1). Hohlraums act as radiation enclosures that convert the optical laser light into soft x-rays that are characterized by the radiation temperature T RAD . Present ignition designs operate at temperatures of 270 to 305 eV or 3.1 to 3.5 million K. The radiation field compresses a spherical fusion capsule mounted in the center of the hohlraum by x-ray ablation of the outer shell. The ablation process compresses the cryogenically prepared solid deuterium-tritium fuel layer in a spherical rocket implosion. In the final stages, the fuel reaches densities 1000-times solid and the central hot spot temperatures will approach 100 million K to initiate the nuclear burn process.We have symmetrically imploded 1.8-mm diameter fusion capsules in cryogenically fielded centimeter-scale hohlraums at 20 K. These experiments show efficient hohlraum heating to radiation temperatures of 3.3 million K. In addition, the large scale-length plasmas encountered in these experiments have allowed us to use self-generated plasma optics gratings (16) to control the radiation symmetry (17) and to achieve symmetric fusion capsule implosions.Figure 2 A shows the laser power at the frequency-tripled wavelength of 351 nm versus time for two different pulse shapes. These 11-ns and 16-ns long pulses heat 8.4-mm long, 4.6-mm diameter hohlraums with 20% helium, 80% hydrogen (atomic) mixtures and ...

No abstract