Solar control coatings, required for architectural glazing applications in warm climates, must provide controlled optical transmission ( approximately 10-50%) of the solar radiation in the visible region and should reflect efficiently in the infrared (>0.7 mu m) region to create a cool interior in the buildings. Thin films of PbS and CuxS on glass substrates, deposited from chemical baths, are shown to possess excellent solar control characteristics-superior or comparable to the metallic solar control coatings. For example, for an acceptable range of integrated optical transmittance ( approximately 10-20%) in the visible region, the integrated infrared reflectance for AM2 solar spectrum for the different glazings are: PbS coated glass, 50%; CuxS coated glass, 14%; stainless steel/Cu coated glass, 25% and tinted glass, 4%. The CuxS and PbS coatings also have the advantage of giving pleasant reflected colours (golden, purple, blue, etc), which improves the cosmetic appearance. This paper presents the basic requirements of solar control coatings and provides a comparison of the characteristics of PbS and CuxS coatings against commercially available coatings.

No abstract

No abstract

No abstract

The formation of transparent conducting CdO films by chemical bath deposition is reported for the first time. These films exhibit an optical transmittance and electrical conductivity much higher than those CdO films prepared by other physical vapour deposition techniques. They exhibit an optical