Two overlapping legacy seismic profiles, 130 km long end to end, were shot in the 1990s over the Kuruman Hills on the western margin of the Kaapvaal Craton in southern Africa. The 6‐s profiles were aimed at investigating the crustal structure of the western Kaapvaal Craton as well as to locate potential continuation of the Witwatersrand gold‐bearing horizons beneath the cover rocks, the latter of which was unsuccessful. In this study, the legacy seismic data are reprocessed and used to image the iron‐oxide (mainly haematite) mineralization found in the Kuruman Formation of the Griqualand‐West Supergroup, which outcrops along the two seismic profiles. The seismic profiles are located close to the Sishen open pit iron mine, where one of the world's largest iron ore concentrations (986 Mt) is mined. The reprocessed and merged seismic data are combined with magnetic, magnetotelluric, borehole and outcrop data to constrain the interpretation, and all indicate the mineralization host rocks to have ∼500 m thickness and 950 m depth. The seismic data further reveal seismic reflections associated with multiple iron ore horizons, which are affected by a first‐order scale syncline and numerous near‐vertically dipping (∼65–80°) normal and reverse faults of various orientations and throws, thus providing insight into the structurally controlled iron ore mineralization in the area. Seismic tomography and magnetotellurics characterize the sediments to have a velocity ranging between 5000 and 6000 m/s and a resistivity of <10 Ωm. The seismic imaging of the syncline and associated structural disruptions is important for future mining purposes and plans in the area as these structures might have preserved iron‐oxide mineralization from erosion. The reprocessed data thus provide information that could be incorporated in potential future underground mine planning in the area, improving the resource evaluation of the iron‐oxide deposit. Legacy seismic data are thus shown to hold intrinsic quality and possible untapped potential that can be realized via data reprocessing.

No abstract

No abstract

Two legacy reflection seismic profiles were acquired in 1988, north of the Kloof–Driefontein Complex East Mine in the West Rand goldfield (South Africa), for the purpose of gold exploration and mine planning. These legacy 2D seismic data have been reprocessed using the latest processing tools to improve imaging. Special interest is given to the Black Reef Formation, which hosts a known gold orebody. The original legacy data are of poor quality, especially in areas that are dominated by dolomitic outcrops. To improve the quality of the data, special attention was given to the refraction static correction to enhance the continuity of the reflections below dolomitic rocks. Refraction seismic tomograms from both profiles exhibit three‐layer P‐wave velocity models: (1) topsoil (1000–2000 m/s), (2) a weathered layer ranging from ca. 100 to 300 m in thickness (2000–5000 m/s) and (3) bedrock (> 5000 m/s). Seismic profile OK‐212 shows poor imaging of the Black Reef Formation because of the scattering of seismic energy in the near‐surface due to dolomites from the Transvaal Supergroup, while seismic profile OK‐213 exhibits south‐dipping reflections that are associated with the Black Reef Formation. To improve the structural imaging resolution, we tried pre‐stack time migration, pre‐stack depth migration and post‐stack time migration using the Kirchhoff algorithm. PreSDM most improved the imaging of deeper reflections due to its ability to honour complex lateral variations in the velocity field. Both pre‐stack time migration and post‐stack time migration enhanced the continuity of the near‐surface reflections below the dolomitic rocks.

The discovery and characterization of layered intrusions around the globe have been predicated to a large degree on the imaging capabilities of the reflection seismic method. The ability of this tool to detect mineralization zones and structural controls such as faults and folds has been critical in unlocking the economic potential of igneous complexes, most notably the Bushveld Complex in South Africa. In this study, we present novel seismic constraints on the lesser-known Trompsburg Complex in South Africa. Two yet-unpublished seismic profiles were conducted end-to-end in the early 1990s, with a southwest-to-northeast trend through the centre of the ∼2,400 km2 Trompsberg potential field anomaly in South Africa, attributed to a 1915 ± 6 Ma buried layered intrusion complex. The complex was first detected by magnetic and gravity measurements near the town of Trompsburg in 1939 and was subsequently confirmed as a layered intrusion by borehole cores drilled thereafter. The combined length of the two profiles is 108 km. Both profiles have been reprocessed and interpreted to further constrain the subsurface expanse of the Trompsberg Complex along the seismic traverse. Processing and interpretation of the seismic profiles were aided by a handful of studies found in the literature: stratigraphy and physical property measurements of borehole cores that were drilled into the complex in the 1940s; pre-Karoo (∼317 Ma) lithological maps that were constructed based on boreholes in and around the investigation area; and potential field maps of the intrusion area near the town of Trompsburg. Most of the seismic reflection energy is concentrated within the top 1 km in both profiles, where localized reflectors with strong amplitudes are observed, due likely to the dolerite sills that permeate the Karoo cover. These sills obstruct seismic illumination of underlying structures due to their high acoustic impedance contrast with the surrounding soft rock sediments, rendering underlying reflections challenging to identify and enhance. The base of the Karoo is confidently identified to be at an average depth of 1.5 km and several reflection packages have been identified thereunder. These are linked to Proterozoic supracrustals associated with the Witwatersrand, Ventersdorp, Transvaal/Griqualand West, and Kheis Supergroups, as well as the Trompsburg Complex that intruded into them. The geometry of the Trompsburg Complex along the seismic traverse has been constrained with a moderate degree of confidence. It comprises a series of 30° northeasterly dipping reflectors near its southwestern boundary, flat reflectors near its centre at the town of Trompsburg, and 45° southwesterly dipping reflectors near its northeastern boundary. The lateral sub-Karoo extent of the complex is 60 km and its total thickness is difficult to constrain due to lack of deep reflections, but is likely between 6.6 and 7.5 km. The complex subcrops against the Karoo cover except near the southwestern region, where it is overlaid by Waterberg Group sediments.