Analysis of the possibility of using a rotary engine based electric generator to propell a powered sailplane. The paper presents analysis of utilising Wankel type enine as a power input for an electric generator in the motor glider propulsion system. This generator would be a part of the propulsion system of a hybrid motor glider using the AOS 71 motor glider airframe. In the research, the rotational characteristics of the LCR 407ti wankel engine were determined experimentally. Driving torque run, power and fuel consumption were determined as a function of engine speed. The obtained results are presented in diagrams. The conceptual diagram of the hybrid drive is presented. The electric generator was selected and its effectiveness, as well as the effectiveness of entire propulsion system was assessed from the motor glider's performance point of view. Basing on the research conducted, conclusions were drawn and there were indicated the objectives and directions of further research on hybrid propulsion with specific aerodynamic and mass limitations of the aircraft

Comparative analysis of harmful compounds emission of classical and distributed propulsions applied on the AOS motor glider, taking into account the perspective of the development of hybrid propulsions. A novel path is indicated by so-called distributed aircraft propulsion. The advantages and disadvantages of this type of solutions are presented, as well as the conceptual design of the distributed propulsion for the AOS 71 motor glider. In the paper there were compared the emissions of harmful compounds generated by a hybrid power unit developed for the airframe of AOS 71 motor glider – traditional propulsion, so-called focused (one-propeller) and dispersed propulsion (multi-propelled). Functional diagrams of both types of propulsions solutions are presented. Construction and aerodynamic constraints of both propulsions are discussed and comparative analysis is made. In the traditional version of the propulsion (so-called focused propulsion). the propeller is driven by an Emrax 228 electric engine with effective parameters: N = 55 kW, M = 120 Nm. The power source is a battery set with a capacity of 16 Ah and a range extender powered by a LCR 407ti rotating piston engine with maximum power of 28 kW. In the variant of the distributed propulsion. Ten electric engines of AXI 8120 type were used to drive small propellers arranged along the wingspan. The power source in this variant is analogous to the variant with the Emrax electric engine. For the adopted variant of the flight mission of the motor glider. a flight trajectory model was developed, which was used to determine the load of the power unit. In laboratory conditions. emission tests of both propulsions were conducted. The results are summarized in charts and discussed in the conclusions.

Analysis of the possibility of using an engine with a rotating piston as the propulsion of an electric generator in application to a motor glider propulsion The paper presents an analysis of the possibilities of application of a rotating piston engine (Wankel type) as a propulsion for an electric generator in the motor glider propulsion system. This generator would be a part of the propulsion system of a hybrid motor glider using the AOS 71 motor glider airframe. In the research, the rotational characteristics of the LCR 407ti engine were determined experimentally. Driving torque run, power and fuel consumption were determined as a function of engine speed. The obtained results are presented in diagrams. The conceptual diagram of the hybrid drive is presented. The current generator was selected and the effectiveness of the generator and the entire propulsion were assessed from the motor gliders performance point of view. On the basis of the conducted research, conclusions were drawn and there were indicated the objectives and directions of further research on hybrid propulsion with specific aerodynamic and mass limitations of the aircraft

No abstract

Comparative analysis of combustion and hybrid propulsion unit in aviation application in terms of emission of harmful compounds in the exhausts emitted to the atmosphere. For the propulsion of the AOS 71 motor glider, two types of propulsion were planned as de-velopment versions. The first analysed propulsion is based on a combustion engine, but of the Wankel type (LCR 814 engine with the power of 55 kW). The second designed propulsion is an hybrid based on a LCR 407 combustion engine with a power of 28 kW, which is connected in series with an electric generator propelling the engine (Emrax 228 engine), total power of the propulsion is 55 kW. The comparison of emissions of harmful compounds emitted to the atmosphere generated by the combustion and hybrid power unit intended for assembly in the AOS 71 motor glider, assuming various loads and methods of hybrid propulsion control, was made. The tests were conducted in laboratory conditions. Several different programs were designed to simulate different energy management methods in a hybrid system, depending on the predicted mission and load of the motor glider. On the basis of laboratory tests, exhaust emission was determined from both propulsions as a function of rotational speed and load. Then, based on the assumed flight trajectory and collected test data, the emission for both propulsions variants was determined. The values of emission parameters were compared and the results were presented in diagrams and discussed in the conclusions