No abstract

The use of conductive polymers (CPs) as a substrate in ambient paper spray ionization was achieved under high DC voltage.

This study aimed to show that the physicochemical proprieties obtained by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and scanning electronic microscopy (SEM) can be useful tools for evaluating the quality of active pharmaceutical ingredients (APIs) and pharmaceutical products. In addition, a simple, sensitive, and efficient method employing HPLC-DAD was developed for simultaneous determination of lidocaine (LID), ciprofloxacin (CFX) and enrofloxacin (EFX) in raw materials and in veterinary pharmaceutical formulations. Compounds were separated using a Gemini C18 (250 mm × 4.6 mm, 5 µm) Phenomenex® column, at a temperature of 25 °C, with a mobile phase containing 10 mM of phosphoric acid (pH 3.29): acetonitrile (85.7:14.3, v/v) and a flow rate of 1.5 mL/min. Physicochemical characterization by TG, FTIR, and SEM of raw materials of LID, CFX, and EFX provided information useful for the evaluation, differentiation, and qualification of raw materials. Finally, the HPLC method was proved to be useful for evaluation of raw material and finished products, besides satisfying the need for an analytical method that allows simultaneous determination of EFX, CFX, and LID, which can also be extended to other matrices and applications.

publicado na web em 11/12/2017 This study shows that Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) can be used as supporting tools for the evaluation of the quality of antiparasitics. In addition, an analytical methodology was developed and validated to quantify simultaneously thiabendazole (TB), febantel (FB), toltrazuril (TZ), and fluazuron (FZ) in bulk and in their veterinary pharmaceutical formulations using reverse phase high performance liquid chromatography (RP-HPLC). In order to investigate stability, pharmaceuticals were submitted to degradation processes under different conditions, such as recommended by the International Conference on Harmonization. The chromatographic conditions were optimized and the validation parameters, such as selectivity, linearity, detection limit, quantification limit, precision, accuracy, and robustness showed results within acceptable standards. All analytes were stable in the stability assays in acid and basic media and thermal conditions, except in the oxidation process, which presented two degradation peaks. Physicochemical characterization by TGA, FTIR, and SEM of raw materials of TB, FB, TZ, and FZ provided information about the authenticity of the analytes, proving the wide applicability of the instrumental techniques. The RP-HPLC proposed method was found to be accurate, precise, and reproducible and can in addition be used for routine quality control analysis.

No abstract