In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carried by the wave is then related to this measured E-field, which leads to a new direct International System of Units (SI) measurement of RF power. To demonstrate this approach, we first measure the field distribution of the fundamental mode in the waveguide and then measure the power carried by the wave at both 19.629 GHz and 26.526 GHz. We obtain good agreement between the power measurements obtained with this new technique and those obtained with a conventional power meter.
We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups around the world as a means to develop a new SI traceable RF Efield measurement technique. For this to be a useful technique, it is important to understand the influence of BLWGN. We perform EIT/AT based E-field experiments with BLWGN centered on the RF transition frequency and for the BLWGN blue-shifted and red-shifted relative to the RF transition frequency. The EIT signal can be severely distorted for certain noise conditions (bandwidth, center-frequency, and noise power), hence altering the ability to accurately measure a CW RF E-field strength. We present a model to predict the changes in the EIT signal in the presence of noise. This model includes AC Stark shifts and on resonance transitions associated with the noise source. The results of this model are compared to the experimental data and we find very good agreement between the two.
We discuss a power-measurement technique traceable to the International System of Units (SI) based on radiation pressure (or radiation force) inherent in an electromagnetic wave. A measurement of radiation pressure offers the possibility for a power measurement traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we performed measurements of the radiation pressure in a radio-frequency (RF) electromagnetic field at three frequencies (26.5 GHz, 32.5 GHz, and 40.0 GHz) and power levels ranging from 2 W to 25 W using a commercially available mass scale. We show comparisons between the RF power obtained with this technique and those obtained with a conventional power meter. The results in this paper represent the first step towards the realization of a more direct link to RF power within the newly redefined SI.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.