Image acquisition systems based on multi-head arrangement of digital cameras are attractive alternatives enabling a larger imaging area when compared to a single frame camera. The calibration of this kind of system can be performed in several steps or by using simultaneous bundle adjustment with relative orientation stability constraints. The paper will address the details of the steps of the proposed approach for system calibration, image rectification, registration and fusion. Experiments with terrestrial and aerial images acquired with two Fuji FinePix S3Pro cameras were performed. The experiments focused on the assessment of the results of self-calibrating bundle adjustment with and without relative orientation constraints and the effects to the registration and fusion when generating virtual images. The experiments have shown that the images can be accurately rectified and registered with the proposed approach, achieving residuals smaller than one pixel.

The monitoring of forest resources is crucial for their sustainable management, and tree species identification is one of the fundamental tasks in this process. Unmanned aerial vehicles (UAVs) and miniaturized lightweight sensors can rapidly provide accurate monitoring information. The objective of this study was to investigate the use of multitemporal, UAV-based hyperspectral imagery for tree species identification in the highly diverse Brazilian Atlantic forest. Datasets were captured over three years to identify eight different tree species. The study area comprised initial to medium successional stages of the Brazilian Atlantic forest. Images were acquired with a spatial resolution of 10 cm, and radiometric adjustment processing was performed to reduce the variations caused by different factors, such as the geometry of acquisition. The random forest classification method was applied in a region-based classification approach with leave-one-out cross-validation, followed by computing the area under the receiver operating characteristic (AUCROC) curve. When using each dataset alone, the influence of different weather behaviors on tree species identification was evident. When combining all datasets and minimizing illumination differences over each tree crown, the identification of three tree species was improved. These results show that UAV-based, hyperspectral, multitemporal remote sensing imagery is a promising tool for tree species identification in tropical forests.

Abstract:Fisheye lens cameras enable to increase the Field of View (FOV), and consequently they have been largely used in several applications like robotics. The use of this type of cameras in closerange Photogrammetry for high accuracy applications, requires rigorous calibration. The main aim of this work is to present the calibration results of a Fuji Finepix S3PRO camera with Samyang 8mm fisheye lens using rigorous mathematical models. Mathematical models based on Perspective, Stereo-graphic, Equi-distant, Orthogonal and Equi-solid-angle projections were implemented and used in the experiments. The fisheye lenses are generally designed following one of the last four models, and Bower-Samyang 8mm lens is based on Stereo-graphic projection. These models were used in combination with symmetric radial, decentering and affinity distortion models. Experiments were performed to verify which set of IOPs (Interior Orientation Parameters) presented better results to describe the camera inner geometry. Collinearity mathematical model, which is based on perspective projection, presented the less accurate results, which was expected because fisheye lenses are not designed following the perspective projection. Stereo-graphic, Equi-distant, Orthogonal and Equi-solid-angle projections presented similar results even considering that Bower-Samyang fisheye lens was built based on Stereo-graphic projection. The experimental results also demonstrated a small correlation between IOPs and EOPs (Exterior Orientation Parameters) for Bower-Samyang lens.Keywords: Photogrammetry; Camera calibration; Digital cameras; Omnidirectional Systems. Resumo:As câmaras com objetiva olho de peixe permitem aumentar o campo de visada da câmara, e consequentemente é amplamente empregada na robótica. O uso desse tipo de câmara em aplicações de alta acurácia na Fotogrametria a curta distância, exige a sua calibração. O objetivo principal é calibrar a câmara Fuji Finepix S3pro com a lente olho de peixe Bower-Samyang 8mm usando modelos matemático rigorosos. Modelos matemáticos baseados nas projeções perspectiva, estereográfica, equidistante, ortogonal e do ângulo equi-sólido foram implementados e usados nos experimentos. As lentes olho de peixe são geralmente fabricadas seguindo um dos quatro últimos modelos, e a lente Bower-Samyang 8 mm é baseada na projeção estereográfica. Os modelos matemáticos foram usados em conjunto com os modelos de distorções radial simétrica, descentrada e de afinidade. Experimentos foram realizados para verificar o conjunto de parâmetros de orientação interior adequado para descrever a geometria interna da câmara. O modelo matemático de colinearidade, baseado na projeção perspectiva, apresentou o resultado menos acurado. As lentes olho de peixe não são fabricadas conforme a projeção perspectiva, o que justifica esse resultado. Os resultados obtidos com as projeções estereográfica, equidistante, ortogonal e do ângulo equi-sólido não apresentam diferenças significativas, embora a lente olho de peixe Bower-Samyang tenha sido constr...

ABSTRACT:The aim of this paper is to present results achieved with a 3D terrestrial calibration field, designed for calibrating digital cameras and omnidirectional sensors. This terrestrial calibration field is composed of 139 ARUCO coded targets. Some experiments were performed using a Nikon D3100 digital camera with 8mm Samyang Bower fisheye lens. The camera was calibrated in this terrestrial test field using a conventional bundle adjustment with the Collinearity and mathematical models specially designed for fisheye lenses. The CMC software (Calibration with Multiple Cameras), developed in-house, was used for the calibration trials. This software was modified to use fisheye models to which the Conrady-Brown distortion equations were added. The target identification and image measurements of its four corners were performed automatically with a public software. Several experiments were performed with 16 images and the results were presented and compared. Besides the calibration of fish-eye cameras, the field was designed for calibration of a catadrioptic system and brief informations on the calibration of this unit will be provided in the paper.

ABSTRACT:Marginal erosions in reservoirs of hydroelectric plants have caused economic and environmental problems concerning hydroelectric power generation, reduction of productive areas and devaluing land parcels. The real extension and dynamics of these erosion processes are not well known for Brazilian reservoirs. To objectively assess these problems Unesp (Univ Estadual Paulista) and Duke Energy are developing a joint project which aims at the monitoring the progression of some erosive processes and understanding the causes and the dynamics of this phenomenon. Mobile LASER scanning was considered the most suitable alternative for the challenges established in the project requirements. A MDL DynaScan Mobile LASER M150 scanner was selected which uses RTK for real time positioning integrated to an IMU, enabling instantaneous generation of georeferenced point clouds. Two different reservoirs were choose for monitoring: Chavantes (storage plant) and Rosana (run-of-river plant), both in the Paranapanema River, border of São Paulo and Paraná States, Brazil. The monitoring areas are scanned quarterly and analysed with base on the point cloud, meshes, contours and cross sections. Cross sections are used to visualize and compute the rate and the dynamics of erosion. Some examples and quantitative results are presented along with an analysis of the proposed technique. Some recommendations to improve the field work and latter data processing are also introduced.