No abstract

This study investigates the enzymatic esterification of glycerol and ibuprofen in a solventless medium catalyzed by immobilized lipase B from Candida antarctica (Novozym®435). Fixing the concentration of this enzymatic solid preparation at 30 g·L−1, and operating at a constant stirring speed of 720 rpm, the temperature was changed between 50 and 80 °C, while the initial concentration of ibuprofen was studied from 20 to 100 g·L−1. Under these conditions, the resistance of external mass transport can be neglected, as confirmed by the Mears criterion (Me < 0.15). However, the mass transfer limitation inside the pores of the support has been evidenced. The values of the effectiveness factor (η) vary between 0.08 and 0.16 for the particle size range considered according to the Weisz–Prater criteria. Preliminary runs permit us to conclude that the enzyme was deactivated at medium to high temperatures and initial concentration values of ibuprofen. Several phenomenological kinetic models were proposed and fitted to all data available, using physical and statistical criteria to select the most adequate model. The best kinetic model was a reversible sigmoidal model with pseudo-first order with respect to dissolved ibuprofen and order 2 with respect to monoester ibuprofen, assuming the total first-order one-step deactivation of the enzyme, with partial first order for ibuprofen and enzyme activity.

Reactive distillation in the presence of toluene permits the intensification of ibuprofen monoglyceride synthesis by means of aCandida antarcticaindustrial solution, attaining total conversion.

No abstract

This work was focused on the enzymatic esterification of glycerol and ibuprofen at high concentrations in two triphasic systems composed of toluene+ibuprofene (apolar) and glycerol or glycerol–water (polar) liquid phases, and a solid phase with the industrial immobilized lipase B from Candida antarctica named Novozym®435 (N435) acting as the biocatalyst. Based on a preliminary study, the concentration of the enzyme was set at 30 g·L−1 and the stirring speed at 720 r.p.m to reduce external mass transfer limitations. To obtain more information on the reaction system, it was conducted at a wide range of temperatures (50 to 80 °C) and initial concentrations of ibuprofen (20–100 g·L−1, that is, 97 to 483 mM). Under these experimental conditions, the external mass transfer, according to the Mears criterion (Me = 1.47–3.33·10−4 << 0.15), was fast, presenting no limitation to the system productivity, regardless of the presence of water and from 50 to 80 °C. Considering that the enzyme is immobilized in a porous ion-exchange resin, limitations due to internal mass transfer can exist, depending on the values of the effectiveness factor (η). It varied from 0.14 to 0.23 at 50 to 80 °C and 0.32–1 mm particle diameter range in the absence of water, and in the same ranges, from 0.40 to 0.66 in the presence of 7.4% w/w water in the glycerol phase. Thus, it is evident that some limitation occurs due to mass transfer inside the pores, while the presence of water in the polar phase increases the productivity 3–4 fold. During the kinetic study, several kinetic models were proposed for both triphasic reacting systems, with and without first-order biocatalyst deactivation, and their fit to all relevant experimental data led to the observation that the best kinetic model was a reversible hyperbolic model with first-order deactivation in the anhydrous reaction system and a similar model, but without deactivation, for the system with added water at zero time. This fact is in sharp contrast to the use of N435 in a water-glycerol monophasic system, where progressive dissolution of ibuprofen in the reacting media, together with a notable enzyme deactivation, is observed.