No abstract

The depletion of fossil resources is driving forward the search for new and alternative renewable feedstocks in the production of renewable chemicals, which could replace the petroleum-based ones. One such feedstock is pine (Pinus sylvestris) sawdust, which is generated enormous amounts in Finnish sawmills yearly. However, prior to the utilization in high-value applications, it needs to be fractionated into its constituents. In this work, the objective was to produce monomeric hemicellulose sugars from pine sawdust without degrading cellulose or lignin simultaneously. The influence of the reaction temperature and time, as well as acid type and concentration, was studied. Based on the results, the temperature was the main distinguishing feature between cellulose and hemicellulose hydrolysis. Promising results were achieved with acid mixtures consisting of 0.5% sulfuric acid and 5.5 or 10% formic acid. At 120°C with the reaction time of 2 h, the mixtures produced hemicellulose sugars with the yields of 62%. These yields were comparable to the yields achieved in similar conditions with 1.5% sulfuric acid or 40% formic acid. Therefore, by using an acid mixture, the concentration of a single acid could be reduced significantly. The solid fractions remaining after the hydrolysis consisted mainly of cellulose and lignin, which verified the selectivity of the hemicellulose hydrolysis. Also, the fractionation of the remaining solids confirmed that the utilization of all the sawdust components is feasible.

Levulinic acid derived from biomass is a versatile platform molecule, which can be used in manufacturing different compounds to replace fossil-based chemicals. In this study, the effect of sulfolane as solvent in sulphuric acid catalysed levulinic acid production from glucose was investigated. The broad sulfolane concentration range was systematically studied and a kinetic model was developed to describe the levulinic acid production. A significant increase in glucose conversion rate was observed when the proportion of sulfolane in the solvent mixture was increased. The maximum selectivity of the levulinic acid production was found to be slightly over 50 % and independent of the solvent composition. Thus, with sulfolane solvent, the same yields can be obtained in a significantly shorter time or at a lower temperature as when water is used as solvent. Sulfolane was also found to keep the generated by-products in soluble form. This will decrease fouling of the process equipment, which has been a major issue in designing of levulinic acid production processes.

No abstract

This study aims to examine the characteristics of two solid lignin fractions isolated from wheat straw using alkaline and acidic deep eutectic solvents (DESs). The chemical properties and morphological characteristics of the two lignin fractions were evaluated by measuring their purity, elemental composition, molecular weight and particle size distributions, and microstructure. Their chemical structure was evaluated using DRIFT spectroscopy, GPC, TGA, 13 C NMR, 31 P NMR, and HSQC NMR. Our findings showed that the lignin isolated using alkaline DES was less pure and had smaller particle size, higher molecular weight, and thermal stability compared to the lignin isolated using acidic DES. Their lignin structure was also determined to be different due to varying selective fractures on the linkages of lignin. These results suggest that the DES treatments could selectively extract lignin from wheat straw with different yields, composition, morphology, and structure, which could then provide a theoretical basis for the selection of DESs for specially appointed lignin extraction.