Leaner burning and downsizing are two concepts pursued by engine developers to reduce fuel consumption and emissions. Both approaches lead to increasing challenges concerning ignition, as these concepts are typically associated with an increase in flow velocity and degree of turbulence as well as raised pressure at the moment of ignition. In this context, the use of miniaturized passively Q-switched laser spark plugs with pulse train ignition is considered as a promising alternative to conventional spark plugs.However, the application of these passively Q-switched laser spark plugs inevitably leads to the question of optimum pulse train parameters. For a better understanding, this study deals with improved flame formation by passively Qswitched laser pulse train ignition under engine-like conditions. The entire ignition process is investigated with a special focus on interactions of consecutive pulses. Therefore, three methods are combined: energy transfer measurements from laser pulse to plasma with high temporal and spatial resolution show the breakdown process depending on different pressures and fluid mixtures. The temperature decrease in the induced plasma is analyzed with measurement strategies for temporal high-resolved plasma spectroscopy especially adapted to passively Q-switched lasers. In combination with high-speed schlieren measurements, the changing local ignition conditions during pulse train ignition are demonstrated. The experiments show how consecutive pulses interact and contribute to the ignition in case of a gas flow. The used prototypes of laser spark plugs are provided by Robert Bosch GmbH.

Miniaturized passively Q-switched Nd:YAG/Cr 4+ :YAG lasers are promising candidates as spark sources for sophisticated laser ignition. The influence of the complex spatial-temporal pulse profile of such lasers on the process of plasma breakdown and on the energy transfer is studied. The developed measurement technique is applied to an open ignition system as well as to prototypes of laser spark plugs. A detected temporal breakdown delay causes an advantageous separation of plasma building phase from energy transfer. In case of fast rising laser pulses, an advantageous reduction of the plasma breakdown delay occurs instead. 4730-4739 (2007). 12. T. X. Phuoc, "Laser spark ignition: experimental determination of laser-induced breakdown thresholds of combustion gases," Opt.

No abstract

Miniaturized passively q-switched laser ignition systems are a promising alternative to conventional ignition sources to ensure a reliable ignition under difficult conditions. In this study the influences of focal point properties on energy transfer from laser to plasma as well as plasma formation and propagation are investigated as the first steps of the laser induced ignition process. Maximum fluence and fluence volume are introduced to characterize focal point properties for varying laser pulse energies and focusing configurations. The results show that the transferred laser energy increases with increasing maximum fluence. During laser emission plasma propagates along the beam path of the focused laser beam. Rising maximum fluence results in increased plasma volume, but expansion saturates when fluence volume reaches its maximum.

No abstract