Integration of organic light emitting diodes (OLEDs) and organic photodetectors (OPDs) on flexible plastic substrates promises compact and low-cost optical detection units for multiplex sensors. These units may be laminated to a microfluidic system for sensing applications in a liquid. Here, a 6 × 6 element matrix of alternating blue OLEDs and OPDs is demonstrated on a single flexible plastic substrate. The devices are fabricated by masked thermal evaporation on a 200 µm thick polyethylene terephthalate (PET) foil. The individual device size is 1 mm × 1 mm. Both OLEDs and OPDs are demonstrated to work. The spectral characteristics are shown to be suitable for fluorescence measurements. Signals from fluorescence-labeled spots above the OPDs under OLED excitation are investigated. Successful operation of the OLED-OPD matrix for reflection measurement is demonstrated.

We present a system efficiency analysis of a monolithic integrated organic optoelectronic unit for the detection of fluorescence labeled single-stranded DNA (ssDNA) for veterinary disease testing. The side-by-side integration of an organic light emitting diode (OLED) and an organic photodetector (OPD) with 0.5 mm by 0.5 mm device sizes has the potential to enable compact and low-cost fluorescence point-of-care (POC) devices for decentral multiplex biomedical testing. Here, we used two 6-FAM and BHQ1 labeled complementary ssDNA strands to form the Förster resonance transfer (FRET) upon the hybridization of the DNA. In this work we successfully show ssDNA hybridization sensing with samples diluted in TE buffer and investigate the detection of covalently bound 6-FAM-ssDNA on a glass surface for multiplex biomarker measurements.

The application of nanopatterned electrode materials is a promising method to improve the performance of thin-film optoelectronic devices such as organic light-emitting diodes (OLEDs) and organic photovoltaics. Light coupling to active layers is enhanced by employing nanopatterns specifically tailored to the device structure. A range of different nanopatterns is typically evaluated during the development process. Fabrication of each of these nanopatterns using electron-beam lithography is time- and cost-intensive, particularly for larger-scale devices, due to the serial nature of electron beam writing. Here, we present a method to generate nanopatterns of varying depth with different nanostructure designs from a single one-dimensional grating template structure with fixed grating depth. We employ multiple subsequent steps of UV nanoimprint lithography, curing, and ion beam etching to fabricate greyscale two-dimensional nanopatterns. In this work, we present variable greyscale nanopatterning of the widely used electrode material indium tin oxide. We demonstrate the fabrication of periodic pillar-like nanostructures with different period lengths and heights in the two grating directions. The patterned films can be used either for immediate device fabrication or pattern reproduction by conventional nanoimprint lithography. Pattern reproduction is particularly interesting for the large-scale, cost-efficient fabrication of flexible optoelectronic devices.

In this study, we present a highly integrated design of organic optoelectronic devices for Point-of-Need (PON) nitrite (NO2−) measurement. The spectrophotometric investigation of nitrite concentration was performed utilizing the popular Griess reagent and a reflection-based photometric unit with an organic light emitting diode (OLED) and an organic photodetector (OPD). In this approach a nitrite concentration dependent amount of azo dye is formed, which absorbs light around ~540 nm. The organic devices are designed for sensitive detection of absorption changes caused by the presence of this azo dye without the need of a spectrometer. Using a green emitting TCTA:Ir(mppy)3 OLED (peaking at ~512 nm) and a DMQA:DCV3T OPD with a maximum sensitivity around 530 nm, we successfully demonstrated the operation of the OLED–OPD pair for nitrite sensing with a low limit of detection 46 µg/L (1.0 µM) and a linearity of 99%. The hybrid integration of an OLED and an OPD with 0.5 mm × 0.5 mm device sizes and a gap of 0.9 mm is a first step towards a highly compact, low cost and highly commercially viable PON analytic platform. To our knowledge, this is the first demonstration of a fully organic-semiconductor-based monolithic integrated platform for real-time PON photometric nitrite analysis.