Introduction:Increasing population, the need for services, and industrialization of societies have led to a growing demand for shift work. Shiftwork causes several disorders, and determining the weight of each disorders is important for their prevention and treatment. Therefore, the purpose of the present study was to use Analytic Network Process (ANP) to prioritize and weigh shift work disorders among the personnel of hospitals of Kerman University of Medical Sciences.Methods:This cross-sectional, descriptive-analytical study was conducted in 2017 among 300 shift work personnel of 10 public hospitals affiliated with Kerman University of Medical Sciences. ANP was used to prioritize and weigh shift work disorders. To this end, the criteria, sub-criteria, and alternatives were initially identified. Then, shift work disorders were categorized into 7 general criteria, 20 sub-criteria, and 3 alternatives. After designing the ANP and determining the effect of each criterion on the sub-criteria, the ANP questionnaire was developed and administered among the shift work personnel, who filled it out based on ANP. Super Decisions was subsequently used to weigh and prioritize shift work disorders.Results:The results indicated that shift work disorders among the nurses included sleep disorders (0.297), psychological disorders (0.275), digestive disorders (0.137), personal life disorders (0.122), etc., in that order of weighing. With respect to the support staff, the major shift work disorders involved sleep disorders (0.252), digestive disorders (0.198), personal life disorders (0.168), and psychological disorders (0.164). Considering security personnel, the top four shift work disorders were sleep disorders (0.201), digestive disorders (0.186), psychological disorders (0.174), and personal life disorders (0.145).Conclusion:According to the findings, sleep disorders had the highest weight in the three studied groups. Moreover, the night shift had the most profound effect on shift work disorders among the personnel in the three groups. It was followed by the evening shift. Morning shift had the lowest influence on shift work disorders. Therefore, the schedules should be taken to prevent these complications in the shift workers. It is suggested that work shift complications be included in the periodic examination program and, in case of discovery of any rhythmic disorder in each shift workers, the person should not remain in the shiftwork group for some time.

Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments. Due to the high costs of exposure to excessive noise; continuous sound evaluation, propose and implement noise control plans in occupational environments is necessary. Thus, the present study aimed to review environmental sound measurements, drawing of noise maps, and prioritizing the engineering noise control methods using the Analytic Hierarchy Process (AHP). This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations (CGSs) of Kerman, Iran in 2021. The present study was done in two phases. In the first phase, six CGSs were investigated to measure and evaluate the noise. In addition, the noise map of a CGS was drawn using the Surfer software. Finally, the AHP was used in the second phase of the research to prioritize the control measures. In this phase, four criteria and ten alternatives were identified. According to first phase results, the sound pressure level (SPL) of the stations varied from 76 to 98 dBA. Besides, the majority of the studied stations had a sound level higher than 85 dBA (danger zone). The second phase of the study showed that out of the four evaluated criteria, the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052, respectively. Based on the results of prioritization of the alternatives, using a silenced regulator (weight of 0.223) and increasing the thickness of the tube (weight of 0.023) had the highest and lowest priorities among the alternatives, respectively. The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs. Additionally; it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making. The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.

Location-routing is an extremely important problem in supply chain management. In the location-routing problem, decisions are made about the location of facilities such as distribution centers as well as the set of vehicle routes. Today, organizations seek to reduce the transportation cost by outsourcing which leads to a specific type of transportation problems called open routing. On the other hand, the growing concerns of environmental impacts have led to paying more attention to environmental issues and reducing the environmental impacts of logistics activities. To this end, in this paper, both open and closed routes are simultaneously addressed by developing a multi-objective mixed integer linear programming model that included three economic, environmental, and social responsibility aspects. The three objective functions of the proposed model encompass the minimization of total costs and greenhouse gas emissions, and the maximization of employment rate and economic development. Also, in this study, a different type of routing is considered in each echelon. A small-sized problem instance is solved using the Augmented Epsilon Constraint (AEC) method with the CPLEX Optimizer Solver for the validation of the proposed model. Due to the NP-Hardness of the problem, two efficient metaheuristic algorithms of Non-dominated Sorting Genetic Algorithm (NSGA-II) and Multi-Objective Stochastic Fractal Search (MOSFS) are exploited to solve the medium and large size problems. The performance of the algorithms is compared in terms of time, MID, diversity, spacing, SNS, and RAS indexes. The results show that the MOSFS algorithm outperforms the NSGA-II based on several indexes.