Within this contribution liquid-liquid phase separation (LLPS) and precipitation from ethanol was studied as an approach to produce polyamide 11 (PA11) powders for selective laser sintering (SLS). To this end, the cloud point and solution temperature curve of the PA11ethanol was determined experimentally via turbidity measurements. The proper range of system composition and temperature for particle formation was deduced. The dependence of particle characteristics on process parameters (polymer concentration, stirring conditions and temperature regime) during LLPS and precipitation was assessed and the products were characterized with respect to their size and morphology. Furthermore, structural, rheological (c.f. viscosity number) and thermal characteristics were analyzed and correlated with process parameters. Rheological characteristics and molecular weight distributions were determined.After removal of fines and dry coating with hydrophobic fumed silica, an optimized PA11 powder with mean particle of several 10 microns showing good flowability for SLS was obtained. SLS processability of this optimized PA11 powder was demonstrated by building multi-layered test specimens in a laser sintering machine. With this contribution, we present a comprehensive workflow for the process development, product characterization and product application of a SLS powder manufactured via precipitation.

In this study, the feasibility of co-grinding and the subsequent thermal rounding to produce spherical polymer blend particles for selective laser sintering (SLS) is demonstrated for polybutylene terephthalate (PBT) and polycarbonate (PC). The polymers are jointly comminuted in a planetary ball mill, and the obtained product particles are rounded in a heated downer reactor. The size distribution of PBT–PC composite particles is characterized with laser diffraction particle sizing, while the shape and morphology are investigated via scanning electron microscopy (SEM). A thorough investigation and characterization of the polymer intermixing in single particles is achieved via staining techniques and Raman microscopy. Furthermore, polarized light microscopy on thin film cuts enables the visualization of polymer mixing inside the particles. Trans-esterification between PBT and PC during the process steps is investigated via vibrational spectroscopy and differential scanning calorimetry (DSC). In this way, a new process route for the production of novel polymer blend particle systems for SLS is developed and carefully analyzed.

No abstract

No abstract

No abstract