No abstract

No abstract

Littered plastics are partly introduced into water bodies, ultimately transporting this waste to the shores and oceans. At the shore, ultraviolet (UV) radiation (also present in other environmental compartments) and wave breaking cause plastics to degrade and fragment into smaller particles, called microplastics, if below 5 mm. Since these plastics’ surfaces can act as vectors for hydrophobic (toxic) chemical substances (e.g., per- and polyfluoroalkyl substances (PFAS)) and leach (toxic) chemicals into the water, the increase in the surface area through the fragmentation of plastics becomes relevant. Studies investigating different effects on the fragmentation of plastics have mostly disregarded a sufficient mechanical component for fragmentation, focusing on degradation by UV radiation. Therefore, this study investigated the impact of the mechanical fragmentation drivers, wave impact, and sediment abrasion on the fragmentation of expanded polystyrene (EPS), high-density polyethylene (PE-HD), and polyethylene terephthalate (PET) particles. In a newly designed test facility called Slosh-Box, the mentioned impacts were investigated concurrently. The results reveal that the mechanical impacts alone are sufficient for plastic fragmentation, and the test facility is suitable for fragmentation investigations. Furthermore, the increase in surface area was determined via scanning electron microscopy. For EPS, the surface area increased more than 2370-fold, while for PE-HD and PET, surface areas increased between 1 and 8.6 times. Concluding from the results, the new test facility is suitable for plastic fragmentation studies. In addition, sediment was revealed to be a relevant fragmentation driver, which should be included in every experiment investigating the fragmentation of plastic in a nearshore environment independent of other drivers like UV radiation.

The transport behavior of microplastics (MPs) in the fluvial environment is scarcely researched. Besides settling velocities and critical shear stress for erosion, only a few investigations aim at MPs’ vertical concentration profile and the underlying theory required. Therefore, this paper’s experiments investigate vertical concentration profiles of approximately spherical MP particles (d = 1–3 mm) with densities close to water (0.91–1.13 g/cm3) in flow channels, coupling them with fundamental theory for the first time. The experiments were conducted in a tiling flume (slope of 0–2.4%) at 67 and 80 mm water depth, with a turbulent flow, velocities ranging from 0.4 to 1.8 m/s, and turbulence kinetic energy from 0.002 to 0.08 m2/s2. The measured profiles confirm the assumption that the concentration profile shapes of settling plastics are similar to those of sediments and running reversed for buoyant plastics. Furthermore, the hypothesis of the Rouse formula’s applicability for floating and sinking plastics could be confirmed for approximately uniform flows. Future studies tying in with this research should increase particle properties and hydraulic parameter variation.

No abstract