No abstract

Small-diameter biotube vascular grafts developed by in-body tissue architecture had high patency at implantation into rabbit carotid arteries or rat abdominal aortas. However, the thin walls (34 ± 14 μm) of the original biotubes made their implantation difficult into areas with low blood flow volumes or low blood pressure due to insufficient mechanical strength to maintain luminal shape. In this study, caged molds with several windows were designed to prepare more robust biotubes. The molds were assembled with silicone tubes (external diameter 2 mm) and cylindrical covers (outer diameter 7 mm) with 12 linear windows (1 × 9 mm). After the molds were embedded into beagle dorsal subcutaneous pouches for 4 weeks, type C (cage) biotubes were obtained by completely extracting the surrounding connective tissues from the molds and removing the molds. The biotube walls (778 ± 31 μm) were formed at the aperture (width 1 mm) between the silicone rods and the covers by connective cell migration through the windows of the covers. Excellent mechanical properties (external pressure resistance, approximately 4 times higher than beagle native femoral arteries; burst strength, approximately 2 times higher than original biotubes) were obtained. In the acute phase of implantation of the biotubes into beagle femoral arteries, perfect patency was obtained with little stenosis and no aneurysmal dilation. The type C biotubes may be useful for implantation into peripheral arteries or veins in addition to aortas.

The treatment of large or wide-necked cerebral aneurysms is extremely difficult, and carries a high risk of rupture, even when surgical or endovascular methods are available. We are developing novel honeycomb microporous covered stents for treating such aneurysms. In this study, 3 experimental animal models were designed and evaluated quantitatively before preclinical study. The stents were prepared using specially designed balloon-expandable stents (diameter 3.5-5.0 mm, length 16-28 mm) by dip-coating to completely cover their struts with polyurethane film (thickness 20 µm) and microprocessing to form the honeycomb pattern after expansion. (1) In an internal carotid artery canine model (n = 4), all stents mounted on the delivery catheter passed smoothly through the tortuous vessel with minimal arterial damage. (2) In an the large, wide-necked, outer-sidewall aneurysm canine model, almost all parts of the aneurysms had embolized immediately after stenting (n = 4), and histological examination at 2 months revealed neointimal formation with complete endothelialization at all stented segments and entirely organized aneurysms. (3) In a perforating artery rabbit model, all lumbar arteries remained patent (n = 3), with minimal change in the vascular flow pattern for over 1 year, even after placement of a second, overlapping stent (n = 3). At 2 months after stenting, the luminal surface was covered with complete thin neointimal formation. Excellent embolization performance of the honeycomb microporous covered stents without disturbing branching flow was confirmed at the aneurysms in this proof-of-concept study.

Introduction: The first choice of vascular access for hemodialysis is an autogenous arteriovenous fistula, because prosthetic arteriovenous grafts have a high probability of failure. In this study, Biotubes, in-body tissue architecture–induced autologous collagenous tubes, were evaluated for their potential use as vascular access grafts. Three animal implantation models were developed using beagle dogs, and the in vivo performance of Biotubes was observed after implantation in the acute phase as a pilot study. Methods: Biotubes (internal diameter ca. 4.0 mm, length ca. 5.0 cm, and wall thickness ca. 0.7 mm) were prepared through subcutaneous embedding of specially designed molds in beagle dogs for 8 weeks. The Biotubes were then implanted between the common carotid artery and the jugular vein of beagles via three methods, including side-to-side (in) -end-to-end (out) as type 1 (n = 4), side-to-side (both) as type 2 (n = 4), and side-to-end (in) -end-to-side (out) as type 3 (n = 1 using a composite Biotube). Results: Although two cases in type 1 and 2 resulted in Biotube deformation, all cases were patent for 4 weeks and maintained a continuous turbulent flow. At 4 weeks after implantation, percutaneous puncture could be performed repeatedly without aneurysm formation or hemorrhage. Conclusion: Within a short implantation period, with limited animal numbers, this proof-of-concept study showed that Biotubes may have a high potential for use in vascular access.