A new type of supported liquid membrane was made by combining an ionic liquid (IL) with a Nafion membrane reinforced with multifunctional polyhedral oligomeric silsesquioxanes (POSSs) using a layer-by-layer strategy for anhydrous proton-exchange membrane (PEM) application. The POSS was functionalized by direct sulfonation, and the sulfonated POSS (S-POSS) was incorporated into Nafion 117 membranes by the infiltration method. The resultant hybrid membrane shows strong ionic interaction between the Nafion matrix and the multifunctional POSS, resulting in increased glass transition temperature and thermal stability at very low loadings of S-POSS (1%). The presence of S-POSS has also improved the proton conductivity especially at low humidities, where it shows a marked increase due to its confinement in the ionic domains and promotes water uptake by capillary condensation. In order to achieve anhydrous conductivity, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-BTSI) was incorporated into these membranes to provide proton conduction in the absence of water. Although the incorporation of an IL shows a plasticizing effect on the Nafion membrane, the S-POSS composite membrane with an IL shows a higher modulus at high temperatures compared to Nafion 117 and a Nafion-IL membrane, with significantly higher proton conductivity (5 mS/cm at 150 degrees C with 20% IL). This shows the ability of the multifunctional POSS and IL to work symbiotically to achieve the desirable proton conductivity and mechanical properties of such membranes by enhancing the ionic interaction within the material.

Vous avez des questions? Nous pouvons vous aider. Pour communiquer directement avec un auteur, consultez la première page de la revue dans laquelle son article a été publié afin de trouver ses coordonnées. Si vous n'arrivez pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. Questions? Contact the NRC Publications Archive team atPublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. If you wish to email the authors directly, please see the first page of the publication for their contact information. NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://doi.org/10.1021/cm801374hAccess and use of this website and the material on it are subject to the Terms and Conditions set forth at Novel organic−inorganic hybrids with increased water retention for elevated temperature proton exchange membrane application Mistry, Mayur K.; Choudhury, Namita Roy; Dutta, Naba K.; Knott, Robert; Shi, Zhiqing; Holdcroft, Steven http://nparc.cisti-icist.nrc-cnrc.gc.ca/fra/droits L'accès à ce site Web et l'utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D'UTILISER CE SITE WEB. NRC Publications Record / Notice d'Archives des publications de CNRC:http://nparc.cisti-icist.nrc-cnrc.gc.ca/eng/view/object/?id=8c195f29-9008-454b-8ea0-cf7782f3a619 http://nparc.cisti-icist.nrc-cnrc.gc.ca/fra/voir/objet/?id=8c195f29-9008-454b-8ea0-cf7782f3a619 Novel Organic-Inorganic Hybrids with Increased Water Retention for Elevated Temperature Proton Exchange Membrane ApplicationMayur K. Mistry, Namita Roy Choudhury,* Naba K. Dutta, Robert Knott, a Zhiqing Shi, b and Steven Holdcroft c Australia, Mawson Lakes Campus, Mawson Lakes, SA 5095, Australia ReceiVed June 3, 2008. ReVised Manuscript ReceiVed July 17, 2008 A new class of proton-conducting hybrid membranes have been developed using a combination of a solvent-directed infiltration method and sol-gel chemistry with a range of organofunctional silane and phosphate precursors. The phase-separated morphology of Nafion is used as a structure-directing template, which drives the inorganic component into the ionic clusters of the Nafion membrane. The kinetics of the sol-gel reactions were monitored using spectroscopic techniques. Photoacoustic Fourier transform infrared spectroscopy (PA-FTIR) confirms formation of Si-O-Si and Si-O-P bridges in the hybrid membranes, indicating silicate and phosphosilicate structures. The presence of the silicate/phosphosilicate network in the hybrid membranes enhances their thermal stability, thermomechanical properties, water r...

Novel supported liquid membranes (SLMs) have been developed by impregnating Nafion and Hyflon membranes with ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-BTSI). These supported liquid membranes were characterized in terms of their ionic liquid uptake behavior, leaching of ionic liquid by water, thermal stability, mechanical properties, glass transition temperature, ion exchange capacity, and proton conductivity. In general, modified membranes are more flexible than unmodified samples due to the plasticization effects of the ionic liquid. However, these supported liquid membranes exhibit a significant increase in their operational stability and proton conductivity over unmodified membranes. We also demonstrate that proton conductivity of these supported liquid membranes allows conduction of protons in anhydrous conditions with conductivity increasing with temperature. Conductivity of up to 3.58 mS cm(-1) has been achieved at 160 degrees C in dry conditions, making these materials promising for various electrochemical applications.

The high-temperature morphology of supported liquid membranes (SLMs) prepared from perfluorinated membranes such as Nafion and Hyflon and hydrophobic ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-TFSI) has been investigated by small-angle X-ray scattering (SAXS). Proton conductivity results of SLMs before and after leaching show an increase in conductivity with temperature up to 160 °C in an anhydrous environment. DSC results show that crystallites within perfluorinated membranes are thermally stable up to 196 °C. High-temperature SAXS results have been used to correlate structure and morphology of supported liquid membranes with high-temperature conductivity data. The ionic liquid essentially acts as a proton solvent in a similar way to water in hydrated Nafion membranes and increases size of clusters, which allow percolation to be achieved more easily. The cation of the ionic liquid interacts with sulfonate groups within ionic domains through electrostatic interactions and displaces protons. Protons can associate with free anions of the ionic liquid, which are loosely associated with cations and can transport by hopping from anion sites within the membrane. The ionic liquid contributes to proton conductivity at high temperature through achievement of long-range ordering and subsequent percolation.