This study presents a description of an efficient hardware implementation of an elliptic curve cryptography processor (ECP) for modern security applications. A high‐performance elliptic curve scalar multiplication (ECSM), which is the key operation of an ECP, is developed both in affine and Jacobian coordinates over a prime field of size p using the National Institute of Standards and Technology standard. A novel combined point doubling and point addition architecture is proposed using efficient modular arithmetic to achieve high speed and low hardware utilisation of the ECP in Jacobian coordinates. This new architecture has been synthesised both in application‐specific integrated circuit (ASIC) and field‐programmable gate array (FPGA). A 65 nm CMOS ASIC implementation of the proposed ECP in Jacobian coordinates takes between 0.56 and 0.73 ms for 224‐bit and 256‐bit elliptic curve cryptography, respectively. The ECSM is also implemented in an FPGA and provides a better delay performance than previous designs. The implemented design is area‐efficient and this means that it requires not many resources, without any digital signal processing (DSP) slices, on an FPGA. Moreover, the area–delay product of this design is very low compared with similar designs. To the best of the authors’ knowledge, the ECP proposed in this study over Fp performs better than available hardware in terms of area and timing.

No abstract

Developing a high-speed elliptic curve cryptographic (ECC) processor that performs fast point multiplication with low hardware utilization is a crucial demand in the fields of cryptography and network security. This paper presents field-programmable gate array (FPGA) implementation of a high-speed, low-area, side-channel attacks (SCAs) resistant ECC processor over a prime field. The processor supports 256-bit point multiplication on recently recommended twisted Edwards curve, namely, Edwards25519, which is used for a high-security digital signature scheme called Edwards curve digital signature algorithm (EdDSA). The paper proposes novel hardware architectures for point addition and point doubling operations on the twisted Edwards curve, where the processor takes only 516 and 1029 clock cycles to perform each point addition and point doubling, respectively. For a 256-bit key, the proposed ECC processor performs single point multiplication in 1.48 ms, running at a maximum clock frequency of 177.7 MHz in a cycle count of 262 650 with a throughput of 173.2 kbps, utilizing only 8873 slices on the Xilinx Virtex-7 FPGA platform, where the points are represented in projective coordinates. The implemented design is time-area-efficient as it offers fast scalar multiplication with low hardware utilization without compromising the security level. INDEX TERMS Elliptic curve cryptography (ECC), elliptic curve point multiplication (ECPM), twistedEdwards curve, side-channel attacks (SCAs), field-programmable gate array (FPGA).

With the swift evolution of wireless technologies, the demand for the Internet of Things (IoT) security is rising immensely. Elliptic curve cryptography (ECC) provides an attractive solution to fulfill this demand. In recent years, Edwards curves have gained widespread acceptance in digital signatures and ECC due to their faster group operations and higher resistance against side-channel attacks (SCAs) than that of the Weierstrass form of elliptic curves. In this paper, we propose a high-speed, low-area, simple power analysis (SPA)-resistant field-programmable gate array (FPGA) implementation of ECC processor with unified point addition on a twisted Edwards curve, namely Edwards25519. Efficient hardware architectures for modular multiplication, modular inversion, unified point addition, and elliptic curve point multiplication (ECPM) are proposed. To reduce the computational complexity of ECPM, the ECPM scheme is designed in projective coordinates instead of affine coordinates. The proposed ECC processor performs 256-bit point multiplication over a prime field in 198,715 clock cycles and takes 1.9 ms with a throughput of 134.5 kbps, occupying only 6543 slices on Xilinx Virtex-7 FPGA platform. It supports high-speed public-key generation using fewer hardware resources without compromising the security level, which is a challenging requirement for IoT security.

In this paper, an area-time efficient hardware implementation of modular multiplication over five National Institute of Standard and Technology (NIST)-recommended prime fields is proposed for lightweight elliptic curve cryptography (ECC). A modified radix-2 interleaved algorithm is proposed to reduce the time complexity of conventional interleaved modular multiplication. The proposed multiplication algorithm is designed in hardware and separately implemented on Xilinx Virtex-7, Virtex-6, Virtex-5, and Virtex-4 field-programmable gate array (FPGA) platforms. On the Virtex-7 FPGA, the proposed design