No abstract

No abstract

Exergy analysis is a universal method for evaluating the rational use of energy. It can be applied to any kind of energy conversion system or chemical process. An exergy analysis identifies the location, the magnitude and the causes of thermodynamic inefficiencies and enhances understanding of the energy conversion processes in complex systems. Conventional exergy analyses pinpoint components and processes with high irreversibility. To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses are developed. These analyses provide additional information about component interactions and reveal the real potential for improvement of each component constituting a system, as well as of the overall system. In this paper, a real industrial plant is analyzed using both conventional and advanced exergy analyses, and exergoeconomic evaluation. Some of the exergy destruction in the plant components is unavoidable and constrained by technological, physical and economic limitations. Calculations related to the total avoidable exergy destruction caused by each component of the plant supplement the outcome of the conventional exergy analysis. Based on the all-reaching analysis, by improving the boiler operation (elimination of approximately 1 MW of avoidable exergy destruction in the steam boiler) the greatest improvement in the efficiency of the overall system can be achieved

The total exergy destruction occurring in a component is not only due to the component itself (endogenous exergy destruction) but is also caused by the inefficiencies of the remaining system components (exogenous exergy destruction). Hence care must be taken in using the total exergy destruction of a component for making decisions to optimize the overall energy system. In this paper, a complex industrial plant is analyzed by splitting the component’s exergy destruction into its endogenous part (the part resulting totally from the component’s irreversibilities) and its exogenous part (resulting from the irreversibilities of the other components within the system). It is observed that the steam generator has the dominant effect. From the total exergy destruction in the steam generator, 1,097.63 kW or 96.95% come from internal irreversibilities in the component, while the influence of other components on the loss of useful work in the steam generator is only 3.05%.

This paper presents the results of the kinetics research into the drying of fine grained material in a two-component fluidized bed. A review of theoretical and experimental investigations of aerodynamics of the fluidized bed is given, with a special insight into two-component fluidized beds, as well as the basics of heat and material transfer through a fluidized bed. Apart from the theoretical basis of convective drying of wet materials in a stagnant fluidized bed, the paper also emphasizes different approaches to fine grained material drying kinetics. Based on the experimental investigations, where zeolits used as a representative of fine grained material and polyethylene as a representative of inert material (another component), an analysis of the influence of working parameters on drying in a two-component fluidized bed is performed. It is established that, apart from the influence of the considered parameters, such as fluidization velocity, diameter of fine grained material particles and drying agent temperature, on the drying curve, the participation of inert material can considerably increase the intensity of heat and material transfer in the fluidized bed. A comparison of the experimental drying curves of fine grained material in the two-component fluidized bed with the results from the studies by other authors shows satisfactory agreement.