No abstract

This paper presents the design of a two-stage pseudo-differential operational transconductance amplifier (OTA) and its application in low-frequency continuous time filters. The OTA was designed in a 0.18 lm, 0.45 V V T CMOS process. An improved bulk-mode commonmode feedback (CMFB) circuit has been designed which does not load the OTA compared to prior art. A self cascode load structure and partial positive feedback provide higher gain. The bulk terminals of all transistors have been biased to lower their threshold voltages (V T ) and maximize signal swing. The OTA operates at a supply voltage of 0.5 V and consumes only 28 lW of power. Rail-to-rail input is made possible by using the transistor's bulk terminal as the input. For a load of 20 pF the OTA has a measured DC gain of 63 dB and a gain-bandwidth product of 570 kHz. To demonstrate the use of the OTA in practical circuits, three active RC filters were designed: a 10 kHz Butterworth filter, a 10 kHz Bessel filter, and a 2.5 kHz Tschebycheff filter.

No abstract

No abstract