No abstract

No abstract

No abstract

The acoustic emission method has been adopted for detection of damage mechanisms in carbon-fiber-reinforced polymer composite tubes during the three-point bending test. The damage evolution process of the individual samples has been monitored using the acoustic emission method, which is one of the non-destructive methods. The obtained data were then subjected to a two-step technique, which combines the unsupervised pattern recognition approach utilizing the short-time frequency spectra with the boundary curve enabling the already clustered data to be additionally filtered. The boundary curve identification has been carried out on the basis of preliminary tensile tests of the carbon fiber sheafs, where, by overlapping the force versus time dependency by the acoustic emission activity versus time dependency, it was possible to identify the boundary which will separate the signals originating from the fiber break from unwanted secondary sources. The application of the presented two-step method resulted in the identification of the failure mechanisms such as matrix cracking, fiber break, decohesion, and debonding. Besides the comparison of the results with already published research papers, the study presents the comprehensive parametric acoustic emission signal analysis of the individual clusters.

The paper presents wind turbine simulation tests using SolidWorks software. The geometrical model of the HAWT wind turbine was developed based on a real object. It consisted of three selected parts: shell, bearing girders and stiffening ribs. The wing profile of the analyzed object was modelled using NREL’s and NACA airfoils. A numerical analysis was carried out to determine the strength of the tested structure under specific wind speed. Stresses were calculated according to the Huber-Mises hypothesis.