Our aim was to embed a 2D analytical model of a cross-flow tidal turbine inside the open-source SHYFEM marine circulation code. Other studies on the environmental impact of Tidal Energy Converters use marine circulation codes with simplified approaches: performance coefficients are fixed a priori regardless of the operating conditions and turbine geometrical parameters, and usually, the computational grid is so coarse that the device occupies one or few cells. In this work, a hybrid analytical computational fluid dynamic model based on Blade Element Momentum theory is implemented: since the turbine blades are not present in the grid, the flow is slowed down by means of bottom frictions applied to the seabed corresponding to forces equal and opposite to those that the blades would experience during their rotation. This simplified approach allowed reproducing the turbine behavior for both mechanical power generation and the turbine effect on the surrounding flow field. Moreover, the model was able to predict the interaction between the turbines belonging to a small cluster with hugely shorter calculation time compared to pure Computational Fluid Dynamics.

A MATLAB routine, based on a Double Multiple Stream Tube model, developed to quickly predict the performance of cross-flow hydrokinetic turbine, here is presented. The routine evaluate flow data obtained with the open-source marine circulation code SHYFEM. The tool can establish the best locations to place tidal devices taking into account bathymetric constraints and the hydrokinetic potential. Hence, it can be used to decide the best set of geometrical parameters. The geometrical variables of our analysis are turbine frontal area, aspect ratio and solidity. Several sub-models, validated with 3D and 2D CFD simulations, reproduce phenomena such as dynamic stall, fluid dynamic tips losses and the lateral deviation of streamlines approaching the turbine. As a case study, the tool is applied to an area of the northern Adriatic Sea. After having identified some suitable sites to exploit the energy resource, we have compared behaviours of different turbines. The set of geometrical parameters that gives the best performance in terms of power coefficient can vary considering several locations. Conversely, the power production is always greater for turbine with low aspect ratio (for a fixed solidity and area). Indeed, shorter devices benefit from higher hydrokinetic potentials at the top of the water column.

A Double Multiple Stream Tube (DMST) routine to predict the performance of cross-flow hydrokinetic turbines in real environments is presented, along with a site assessment application to identify the most efficient turbine aspect ratio, solidity and configuration (single, or paired) for a selected area of the Northern Adriatic Sea. The peculiarity of this DMST tool is its 3D character, since it allows to reproduce the vertical distribution of the torque generated by the turbine. To this end, correlations for fluid dynamic phenomena, based on high-fidelity fully CFD simulations, were implemented. The marine circulation code SHYFEM is adopted to obtain velocity profiles for a half lunar cycle period. The sites with the highest mean kinetic power were identified. The DMST routine is equipped with an iterative process able to establish which rotational speed maximizes the power output. Indeed, a spatially non-uniform velocity profile requires to determine the flow velocity more suitable to obtain the rotational speed via Tip Speed Ratio (TSR) definition. To this end, the section of the blades working at optimal TSR varies from top to bottom, until the maximum power is reached. It works as a virtual Maximum Power Point Tracking system able to adapt the turbine operating conditions for the different turbine geometries, and for changes in flow conditions. The results show that for the case study, the performance curve shape influences the optimal TSR blade section: the latter is often located in the upper part of the turbine for the low solidity, whereas, for high solidity turbines, in the bottom half part.

We present a novel 3D implementation of a horizontal axis tidal turbine (HATT) in the shallow water hydrostatic code SHYFEM. The uniqueness of this work involves the blade element momentum (BEM) approach: the turbine is parameterized by applying momentum sink terms in the x and y momentum equations. In this way, the turbine performance is the result of both the flow conditions and the turbine’s geometric characteristics. For these reasons, the model is suitable for farm-layout studies, since it is able to predict the realistic behavior of every turbine in a farm, considering the surrounding flow field. Moreover, the use of a shallow water code, able to reproduce coastal morphology, bathymetry wind, and tide effects, allows for studying turbine farms in realistic environments.