Ultra high voltage (UHV, >15 kV) 4H-silicon carbide (SiC) power devices have the potential to significantly improve the system performance, reliability, and cost of energy conversion systems by providing reduced part count, simplified circuit topology, and reduced switching losses. In this paper, we compare the two MOS based UHV 4H-SiC power switching devices; 15 kV 4H-SiC MOSFETs and 15 kV 4H-SiC n-IGBTs. The 15 kV 4H-SiC MOSFET shows a specific onresistance of 204 mΩ cm 2 at 25 °C, which increased to 570 mΩ cm 2 at 150 °C. The 15 kV 4H-SiC MOSFET provides low, temperature-independent, switching losses which makes the device more attractive for applications that require higher switching frequencies. The 15 kV 4H-SiC n-IGBT shows a significantly lower forward voltage drop (V F ), along with reasonable switching performance, which make it a very attractive device for high voltage applications with lower switching frequency requirements. An electrothermal analysis showed that the 15 kV 4H-SiC n-IGBT outperforms the 15 kV 4H-SiC MOSFET for applications with switching frequencies of less than 5 kHz. It was also shown that the use of a carrier storage layer (CSL) can significantly improve the conduction performance of the 15 kV 4H-SiC n-IGBTs.

Future Army pulsed power applications semiconductor devices that will meet requirements for highpower, low weight and volume, and fast switching speed. The following paper presents the pulsed power evaluation of high voltage silicon carbide (SiC) super gate turn-off (SGTO) thyristors. These devices are well suited for high voltage, high temperature pulsed power and continuous power electronic systems. A pulse-forming network (PFN) circuit and a low inductance, series resistor-capacitor (LRC) circuit were developed to evaluate both the fast dI/dt capability and the pulse safe operating area (SOA) of the SiC SGTO. Transient simulations of the high voltage SiC SGTOs were also performed on a narrow pulse LRC circuit to investigate the device's switching behavior under extreme pulsed conditions.

No abstract

No abstract

No abstract