No abstract

This paper is focused on the preparation and physicochemical characterization of two poly(ester ether urethane)s with rifampicin in their matrix and different molar concentrations of urethane groups. The polyurethanes with rifampicin were processed as asymmetrical microporous membranes by a phase inversion method and characterized by attenuated total reflection — Fourier transform infrared (ATR-FTIR) spectroscopy and differential scanning calorimetry (DSC). The influence of the surface morphology in the release of drug compounds was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, and water uptake. The release of rifampicin depends on the molar concentration of urethane groups and also on the surface morphology of the polyurethane membranes. The antibacterial activity was evaluated with S. Epidermidis RP 62 A and P. Aeruginosa ATCC 1544. Finally, the biocompatibility of the polyurethane membranes was studied with human dermal fibroblasts (HDF) to evaluate the potential biomedical applications.

Polyether urethane (PU)-based magnetic composite materials, containing different types and concentrations of iron oxide nanostructures (Fe2O3 and Fe3O4), were prepared and investigated as a novel composite platform that could be explored in different applications, especially for the improvement of the image quality of MRI investigations. Firstly, the PU structure was synthetized by means of a polyaddition reaction and then hematite (Fe2O3) and magnetite (Fe3O4) nanoparticles were added to the PU matrices to prepare magnetic nanocomposites. The type and amount of iron oxide nanoparticles influenced its structural, morphological, mechanical, dielectric, and magnetic properties. Thus, the morphology and wettability of the PU nanocomposites surfaces presented different behaviours depending on the amount of the iron oxide nanoparticles embedded in the matrices. Mechanical, dielectric, and magnetic properties were enhanced in the composites’ samples when compared with pristine PU matrix. In addition, the investigation of in vitro cytocompatibility of prepared PU nanocomposites showed that these samples are good candidates for biomedical applications, with cell viability levels in the range of 80–90%. Considering all the investigations, we can conclude that the addition of magnetic particles introduced additional properties to the composite, which could significantly expand the functionality of the materials developed in this work.

The rheological behaviour of polyurethane (PU) and poly(vinyl alcohol) (PVA) was investigated in aqueous solution and the hydrogel state. The dependence of viscosity on polymer concentration is discussed. The formation of supramolecular structures induced by temperature increase or shear conditions was evidenced. In PU solutions, as temperature increases, a self‐assembling process occurs due to hydrogen bonding and hydrophobic interactions determining a thermoreversible hydrogel formation. In creep and recovery tests, the weak PU network presents high elasticity only at low shear stress (below 10 Pa); it recovers only 15%–20% of strain above 40 Pa and the hydrogel structure fails at high shear stress (above 150 Pa). Also, PU hydrogel is not able to recover its structure after being submitted to successive low and high deformations. In PVA solutions, a shear induced aggregation was observed at 37 °C. PVA hydrogels obtained by the freezing–thawing method present high elasticity and stability due to the strong polymer–polymer interactions established between the polymer chains. Physical networks based on PU/PVA mixtures synergistically combine the characteristics of the two polymers, showing high elasticity when a shear stress up to 3000 Pa is applied during the creep test followed by a fast recovery of the hydrogel structure after exhibiting successive levels of deformation (self‐healing ability). Therefore, these hydrogels are suitable materials for tissue engineering applications. © 2019 Society of Chemical Industry

No abstract