At present the most efficient fire extinguishers are power ones. Fireextinguishing powders of serial production do not fulfill modern requirements, primarily from the viewpoint of their universal and practical use. It must be noted that most of them contain halogen, and it is established that penetration of halogens into the atmosphere causes a breaking of the ozone layer. The main goal of investigation presented in this paper is development of non-halogen, non toxic, environmentally-friendly, highly-efficient, inexpensive, universal, composite fire-extinguish powders based on domestic mineral raw materials such as clay shale, zeolite and perlite. The proposed method of obtaining composite powders does not require the following expensive chemical processing and modification with halogen-inclusive hydrofobizative additives. Hence, these composite powders will be cheaper (1,5-2 times) than powders of serial production. The raw materials: clay shale, zeolite, perlite were selected according to high operating properties, which are indicative of a reduction of burning processes. The powders must not only be effective during the fire extinguish, but also they must maintain those properties, which decrease the extinguishing effect after small changes in properties. The effectiveness of powders is defined not only according to their dispersity and inhibition ability, but also according to their storage and transportation conditions. These conditions are defined by the exploitation properties of powders. The most important among them are: consolidation and caking, dispersity, tendency of humidity, flow and storage duration. We studied the performance properties of zeolite, perlite and clay shale and composite powders based on such materials and established dependence of tendency to consolidation and caking on dispersity. Accordingly, the dispersity of composite powders was selected in such a way that the tendency of consolidation and caking was minimal. At the same time particle size should be relevant towards the rapid head and destruction, so that we have a homogenous effect and heterogeneous inhibition.

The article presents a proposal of use a decision table to support the decision-making process in scope of maintenance management in mining companies. In particular, it refers to decisions related to evaluation and improvement of mining machinery use in the mining production process. The article presents the theoretical foundations of decision tables building and characteristics of the most important stages of creating this table. This whole process was tried to refer specifically the mining industry. For this reason, during construction of the decision tables, the results of research on the effectiveness of the selected mining machines were used. The conducted research provided a lot of data, information and knowledge on the work of the particular mining machines, especially regarding the number and reasons for unplanned breaks during the machines’ work. The developed decision table will consist of conditions, rules and actions whose purpose is to define the recommendations for the particular groups of participants in the mining production process. The obtained results will form the basis for the development of the recommendations and proposals of actions to improve the level of use of mining machines. The authors focused mainly on the practical use of tables to support the decision-making process regarding maintenance and improvement of effectiveness of mining machines. The obtained results confirm the validity of the adopted assumptions. Decision tables can become an important tool that supports the decision-making process within mining companies.

No abstract

2016-12-23T18:44:59

No abstract