No abstract

No abstract

Recently, two‐dimensional (2D) structure on three‐dimensional (3D) perovskites (graded 2D/3D) has been reported to be effective in significantly improving both efficiency and stability. However, the electrical properties of the 2D structure as a passivation layer on the 3D perovskite thin film and resistance to the penetration of moisture may vary depending on the length of the alkyl chain. In addition, the surface defects of the 2D itself on the 3D layer may also be affected by the correlation between the 2D structure and the hole conductive material. Therefore, systematic interfacial study with the alkyl chain length of long‐chained alkylammonium iodide forming a 2D structure is necessary. Herein, the 2D interfacial layers formed are compared with butylammonium iodide (BAI), octylammonium iodide (OAI), and dodecylammonium iodide (DAI) iodide on a 3D (FAPbI3)0.95(MAPbBr3)0.05 perovskite thin film in terms of the PCE and humidity stability. As the length of the alkyl chain increased from BA to OA to DA, the electron‐blocking ability and humidity resistance increase significantly, but the difference between OA and DA is not large. The PSC post‐treated with OAI has slightly higher PCE than those treated with BAI and DAI, achieving a certified stabilized efficiency of 22.9%.

Efficient perovskite solar cells (PSCs) are mainly fabricated by a solution coating processes. However, the efficiency of such devices varies significantly with the aging time of the precursor solution used to fabricate them, which includes a mixture of perovskite components, especially methylammonium (MA), and formamidinium (FA) cations. Herein, how the inorganic–organic hybrid perovskite precursor solution of (FAPbI3)0.95(MAPbBr3)0.05 degrades over time and how such degradation can be effectively inhibited is reported on, and the associated mechanism of degradation is discussed. Such degradation of the precursor solution is closely related to the loss of MA cations dissolved in the FA solution through the deprotonation of MA to volatile methylamine (CH3NH2). Addition of elemental sulfur (S8) drastically stabilizes the precursor solution owing to amine–sulfur coordination, without compromising the power conversion efficiency (PCE) of the derived PSCs. Furthermore, sulfur introduced to stabilize the precursor solution results in improved PSC stability.

No abstract