Honeycomb films with various building units, showing potential applications in biological, medical, physicochemical, photoelectric, and many other areas, could be prepared by the breath figure method. The ordered hexagonal structures formed by the breath figure process are related to the building units, solvents, substrates, temperature, humidity, air flow, and other factors. Therefore, by adjusting these factors, the honeycomb structures could be tuned properly. In this review, we summarized the development of the breath figure method of fabricating honeycomb films and the factors of adjusting honeycomb structures. The organic-inorganic hybrid was taken as the example building unit to discuss the preparation, mechanism, properties, and applications of the honeycomb films.

Abstract-With the advancement of wireless networks and cloud computing, people are becoming increasingly surrounded by a variety of displays -rich electronic devices: TV, Phone, Pad, Notebook and other portable or wearable devices. These electronic products put high demands on the quality of the visual interface. Paper-like displays are reflective and do not require a backlight. They have received much attention after electrophoretic-based electronic paper displays were commercialized in 2004. Paper-like displays combine excellent reading experience with ultra-low power consumption. In particular, their outdoor readability is superior to transmissive liquid crystal displays (LCDs) and organic light emitting devices (OLEDs). In this paper, we give an overview on various paper-like display technologies with emphasis of the status and future development of electrophoretic display and electrofluidic display principles. We focus on both technologies because electrophoretic displays have been commercialized successfully, and electrofluidic display has high potential to deliver video and full color.

No abstract

We report a new top-down nanofabrication technology to realize large area metal nanowire (m-NW) arrays with tunable sub-20 nm separation nanogaps without the use of chemical etching or milling of the metal layer. The m-NW array nanofabrication technology is based on a self-regulating metal deposition process that is facilitated by closely spaced and isolated heterogeneous template surfaces that confine the metal deposition into two dimensions, and therefore, electrically isolated parallel arrays of m-NW can be realized with uniform and controllable nanogaps. Au-NW and Ag-NW arrays are presented with high-density ~10(5) NWs cm(-1), variable NW diameters down to ~50 nm, variable nanogaps down to ~5 nm, and very large nanogap length density ~1 km cm(-2). The m-NW arrays are designed and implemented as interdigitated nanoelectrodes for electrochemical applications and as plasmonic substrates where the coupled-mode localized surface plasmon resonance (LSPR) wavelength in the nanogaps between adjacent m-NW dimers can be precisely tuned to match any excitation source in the range from 500 to 1000 nm, thus providing optimal local electromagnetic field enhancement. A spatially averaged (n = 2500) surface-enhanced Raman scattering (SERS) analytical enhancement factor of (1.2 ± 0.1) × 10(7) is demonstrated from a benzenethiol monolayer chemisorbed on a Au-NW array substrate with LSPR wavelength matched to a He-Ne laser source.