Modeling of superconducting nanowire single-photon detectors typically requires custom simulations or finite-element analysis in one or two dimensions. Here, we demonstrate two simplified one-dimensional SPICE models of a superconducting nanowire that can quickly and efficiently describe the electrical characteristics of a superconducting nanowire. These models may be of particular use in understanding alternative architectures for nanowire detectors and readouts.
Electrolytic capacitors are often used for energy buffering applications, including buffering between single-phase ac and dc. While these capacitors have high energy density compared to film and ceramic capacitors, their life is limited and their reliability is a major concern. This thesis presents a series of stacked switched capacitor (SSC) energy buffer architectures which overcome this limitation while achieving comparable effective energy density without electrolytic capacitors. The architectural approach is introduced along with design and control techniques which enable this energy buffer to interface with other circuits. A prototype SSC energy buffer using film capacitors, designed for a 320 V dc bus and able to support a 135 W load has been built and tested with a power factor correction circuit.This thesis starts with a detailed comparative study of electrolytic, film, and ceramic capacitors, then introduces the principles of SSC energy buffer architectures, and finally designs and explains the design methodologies of a prototype circuit. The experimental results successfully demonstrate the effectiveness of the approach.
Abstract-Planar magnetic components using printed-circuitboard windings are attractive due to their high repeatability, good thermal performance and usefulness for realizing intricate winding patterns. To enable higher system integration at high switching frequency, more sophisticated methods that can rapidly and accurately model planar magnetics are needed. This paper develops a lumped circuit model that captures the impact of skin and proximity effects on current distribution and electromagnetic fields in planar magnetics. This enables accurate predictions of impedances, losses, stored reactive energy and current sharing among parallel windings. This lumped model is also a circuit domain representation of electromagnetic interactions. It can be used to simulate circuits incorporating planar magnetics, to visualize the electromagnetic fields, and to extract parameters for magnetic models by simulations. The modeling results match with previous theories and finite-element-modeling results. A group of planar magnetic devices, including transformers and inductors with various winding patterns, are prototyped and measured to validate the proposed approach.
Abstract-Micro-inverters operating into the single-phase grid from solar photovoltaic (PV) panels or other low-voltage sources must buffer the twice-line-frequency variations between the energy sourced by the PV panel and that required for the grid. Moreover, in addition to operating over wide average power ranges, they inherently operate over a wide range of voltage conversion ratios as the line voltage traverses a cycle. These factors make the design of micro-inverters challenging. This paper presents a multilevel energy buffer and voltage modulator (MEB) that significantly reduces the range of voltage conversion ratios that the dc-ac converter portion of the micro-inverter must operate over by stepping its effective input voltage in pace with the line voltage. The MEB also functions as an active energy buffer to reduce the twice-line-frequency voltage ripple at the output of the solar panel. The small additional loss of the MEB can be compensated by the improved efficiency of the dc-ac converter stage, leading to a higher overall system efficiency. A prototype micro-inverter incorporating a MEB, designed for 27 V to 38 V dc input voltage, 230 V rms ac output voltage, and rated for line cycle average power of 70 W, has been built and tested in grid-connected mode. It is shown that the MEB can successfully enhance the performance of a single-phase grid-interfaced microinverter by increasing its efficiency and reducing the total size of the twice-line-frequency energy buffering capacitance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.