Optical solar reflector smart radiators are able to control the temperature of spacecraft. This work demonstrates a novel smart optical solar reflector using a patterned thermo-chromic VO2 plasmonic meta-surface design. The VO2 meta-surface combines the temperature induced phase transition of VO2 with plasmonic resonances resulting in a significant enhancement of the infrared absorption. The enhanced absorption obtained at a reduced VO2 coverage results in superior emittance tunability Δε and lower solar absorptance α compared to a corresponding thin-film reflector. An emittance tunability of 0.48 is obtained for the meta-reflector design, representing a 30% improvement compared to the unstructured film. Meta-surface based smart optical solar reflectors offer a new route toward energyefficient and cost-effective passive thermal control systems of spacecraft and other surfaces.

Optical Solar Reflectors are devices that combine high reflection for visible wavelengths with a strong emissivity in the infrared. Compared to the conventional rigid quartz tiles used on spacecraft since the 1960s, thin-film solutions can offer a significant advantage in weight, assembly and launch costs. Here, we present a metasurface based approach using an Al-doped * To whom correspondence should be addressed † Electronics ‡ Physics ¶ CREO § NILT ZnO (AZO) transparent conducting oxide as infrared plasmonic material. The AZO is patterned into a metasurface to achieve broad plasmonic resonances with enhanced absorption of electromagnetic radiation in the thermal infrared. In the visible range, the transparent conducting oxide provides low losses for solar radiation, while intrinsic absorption losses in the ultraviolet range are effectively suppressed using a multilayer reflecting coating. The addition of high-emissivity layers to the stack eventually results in comparable emissivity values to the thin plasmonic device, thus defining a window of opportunity for plasmonic absorption as a design strategy for ultrathin devices. The optimized experimental structure achieves solar absorptance (α) of 0.16 and thermal emissivity (ε) of 0.79. Our first prototype demonstrator paves the way for further improvement and large-area fabrication of metasurface solar reflectors, and ultimately their application in space missions.

We report on a significant photocurrent generation from a planar device obtained by coating a bare n doped silicon substrate with a random network of multiwall carbon nanotubes (MWCNTs). This MWCNT/n-Si hybrid device exhibits an incident photon to current efficiency reaching up to 34% at 670 nm. We also show that MWCNTs covering a quartz substrate still exhibit photocurrent, though well below than that of the MWCNTs coating the silicon substrate. These results suggest that MWCNTs are able to generate photocurrent and that the silicon substrate plays a fundamental role in our planar device. The former effect is particularly interesting because MWCNTs are generally known to mimic the electronic properties of graphite, which does not present any photocurrent generation. On the basis of theoretical calculations revealing a weak metallic character for MWCNTs, we suggest that both metallic and semiconducting nanotubes are able to generate e-h pairs upon illumination. This can be ascribed to the presence of van Hove singularities in the density of states of each single wall carbon nanotube constituting the MWCNT and to the low density of electrons at the Fermi level. Finally, we suggest that though both MWCNTs and Si substrate are involved in the photocurrent generation process, MWCNT film mainly acts as a semitransparent electrode in our silicon-based device.

No abstract

No abstract