It is widely known that the accuracy of the finite element method has a direct relation with the type of elements and meshes. Another issue which has remained less treated is the impact of loading type on the accuracy of responses. Changing the applied forces from concentrated to distributed loading has a great effect on the accuracy of certain types of elements and this action can greatly reduce their accuracy. Particularly in the coarse meshes, it creates a critical situation. Some elements do not have the ability to provide the exact answers in stated conditions. For example, the well-known plane element, LST, demonstrates promising performance under concentrated shear and bending loading as well as surface traction. In the case of distributed loads and coarse meshes, its accuracy diminishes considerably. To remedy this defect, in this paper, a new higher-order triangular element is proposed by using natural assumed strain approximation. Various numerical examples demonstrate high accuracy and efficiency of the element in comparison with common well-known finite elements in analysis of structures under distributed loading.

No abstract

No abstract

Purpose This paper aims to propose a new robust membrane finite element for the analysis of plane problems. The suggested element has triangular geometry. Four nodes and 11 degrees of freedom (DOF) are considered for the element. Each of the three vertex nodes has three DOF, two displacements and one drilling. The fourth node that is located inside the element has only two translational DOF. Design/methodology/approach The suggested formulation is based on the assumed strain method and satisfies both compatibility and equilibrium conditions within each element. This establishment results in higher insensitivity to the mesh distortion. Enforcement of the equilibrium condition to the assumed strain field leads to considerably high accuracy of the developed formulation. Findings To show the merits of the suggested plane element, its different properties, including insensitivity to mesh distortion, particularly under transverse shear forces, immunities to the various locking phenomena and convergence of the element are studied. The obtained results demonstrate the superiority of the suggested element compared with many of the available robust membrane elements. Originality/value According to the attained results, the proposed element performs better than the well-known displacement-based elements such as linear strain triangular element, Q4 and Q8 and even is comparable with robust modified membrane elements.

The strain formulation approach improves accuracy and removes complications, such as shear parasitic errors and sensitivity to mesh distortions. For analyzing plane stress and strain problems, two new strain-based triangular elements are proposed. Both compatibility and equilibrium conditions are imposed to these elements. Contrary to the quadrilateral shape, triangular element facilitates proper meshing of various geometries. To formulate these elements, the linear strain field is assumed. The first element is a five-node triangular element, in which each node has two degrees of freedom. In the second one, which is a four-node element, drilling degrees of freedom are added to improve applicability of the element for bending problems. Various numerical examples and patch tests verify high accuracy and efficiency of the suggested elements in comparison with the other existing plane elements.