Energy is essential to the development of a country, and several studies have been carried out on the production and use of energy by industrialised countries. However, little research and development has been carried out in developing countries on renewable energy. Also, the importance of traditional fuels such as biomass has not been emphasised in developing countries like Ghana, which rely on fossil fuels. Ghana relies heavily on imported petroleum fuel obtained from fossil fuels. However, fossil fuels are faced with many limitations including environmental pollution and an escalating price. Hydropower, biomass, biofuel, wind, and solar energy are the major renewable energy resources expected to be fully exploited in the future. This study, therefore, assesses the sources of the main renewable energy in relation to policy, the conditions of the market and food security. The government of Ghana has put in place a favourable business environment for the renewable energy sector by setting explicit feed-in tariffs (FITs). In addition, various acts and legislation have been passed and formulated by the relevant institutions (Renewable Energy Act (832) of 2011). The study revealed that there is an increase in the exploitation and use of energy from renewable resources when compared with the past decades. However, this exploitation is still limited due to barriers such as the cost of technologies, financing issues, and scientific and technical barriers.

No abstract

No abstract

Ghana is experiencing an increase in energy demand as a result of increased industrialization activities. Nonrenewable energy sources, such as combustible fuels like petroleum, are the primary source of energy. Nonrenewable energy resources are associated with a number of issues, including environmental pollution. Renewable energy is a sustainable source of energy that is critical to the energy sector and the economy’s progress. Hydropower, biomass, solar energy, and wind energy are among the renewable energy resources available in Ghana. In Ghana, key institutions are responsible for the management and development of energy sources in the renewable energy sector. Among these institutions is the Ministry of Energy, which is responsible for the formulation and implementation of laws and policies, for instance, the Renewable Energy Act of 2011. Volta River Authority (VRA), Ghana Grid Company (GGC), and Electricity Company of Ghana (ECG) are among the institutions under the Ministry of Energy. There are also regulatory agencies established by parliamentary act to ensure that all actors in the sector are working properly. Among these are the Energy Commission, the Public Utilities Regulatory Commission (PUR), and the National Petroleum Authority. Active nongovernmental organisations (NGOs), research institutes and universities, and industry are also involved in renewable energy activities.

In this study, biodiesel was produced from waste frying oil as feedstock with a calcined fish shell under a heterogeneous solid base catalyst. The process of transesterification was done by varying methanol-to-oil molar ratio, catalyst amount, reaction temperature, and reaction time. The heterogeneous catalyst was prepared stepwise as follows: washing and drying the fish shell for 24 hours at 120°C in an oven, then crushing to form powder having been pound for 2-3 minutes in an agate mortar cleaned with nitric acid (6 N). The powdered fish shell was then calcined at 950°C for 4 hours using a muffle furnace. The calcined catalyst was subsequently kept in a desiccator to avoid encountering moisture. The prepared catalyst was then characterized using XRD and FT-IR. The optimum biodiesel yield of 99.58% was obtained under methanol-to-oil ratio of 10 : 1, catalyst amount of 3.0 wt%, reaction temperature of 60°C, and reaction time of 8 hours with mass transfer control of 600 rpm. The optimum rate of constant of 0.164 L/mol·S−1 was determined using the second-order kinetics model. The constant rate of reaction indicated that the forward reaction is crucial for the reaction. The properties of biodiesel produced conformed with those of the international standard using ASTM D6751.