Developing precise and robust algorithms that can help in obtaining maximum power yield in a variable speed wind turbine is an important area of research in wind engineering. The present manuscript proposes a technique that utilizes a second-generation CRONE controller for the maximum power tracking technique (MPPT) to maximize power generation in a wind energy conversion system (WECS) based on a double-fed induction generator (DFIG). The authors propose this novel method because the classical controllers cannot provide adequate performance in terms of extracting the maximum energy from variable speed wind turbines when applying a real wind profile and they cannot guarantee the high stability of the WECS. Moreover, this novel controller sufficiently handles problems related to the control effort level. The performance of the second-generation CRONE method was mathematically modeled using MATLAB/Simulink and compared with four other types of MPPT control techniques, which include a proportional-integral linear controller (PI), nonlinear sliding mode controller (SMC), backstepping controller (BS), and fuzzy logic controller (FLC). Two different wind profiles, a step wind profile and a real wind profile, were considered for the comparative study. The response time, dynamic error percentage, and static error percentage were the quantitative parameters compared, and the qualitative parameters included set-point tracking and precision. This test demonstrated the superiority of the second-generation CRONE controller in terms of all of the compared parameters.

<p>In this article, we are interested in the improvement of the performances of Doubly Fed Induction Machine (DFIM) operating in motor mode by the use of the direct torque control (DTC). Firstly, we focused on the modeling of the DFIM and the study of the principle of functioning of the DTC control. Then, we implement this control on the Matlab/Simulink environment. Secondly, we present the simulation results of the proposed control. The analysis of these results shows clearly that the system based on the DFIM studied follows perfectly the set points, what allowed us to justify the efficiency of the elaborate control.</p>

In this research paper, a nonlinear Backstepping controller has been proposed in order to improve the dynamic performance of a doubly fed induction generator (DFIG) based Wind Energy conversion System, connected to the grid through a back-to-back converter. Firstly, an overall modeling of proposed system has been presented. Thereafter, three control techniques namely backstepping (BSC), sliding mode (SMC) and field-oriented control (FOC) using a conventional PI regulator have been designed in order to control the stator active and reactive powers of the DFIG. In addition, the maximum power point tracking (MPPT) strategy has been investigated in this work with three mechanical speed controllers: BSC, SMC and PI controller with the aim of making a synthesis and a comparison between their performances to determine which of those three techniques is more efficient to extract the maximum power. Finally, a thorough comparison between the adopted techniques for the DFIG control has been established in terms of response time, rise time, total harmonic distortion THD (%) of the stator current, static errors and robustness. The effectiveness and robustness of each control approach has been implemented and tested under MATLAB/Simulink environment by using a 1.5 MW wind system model.

The integration of wind energy systems into the electric grid has become inevitable despite the many problems associated with this integration. Most of these problems are due to variations in wind speed. The problems are for example oscillations in the power generated, which implies the lack of guarantee of obtaining the maximum energy and the ripple in the electromechanical torque of the generator. This work aims at mitigating these problems for wind energy conversion system-driven doubly-fed induction generator (DFIG), which is the main wind turbine utilized for energy applications. This mitigation is performed through direct reactive and active powers control of the DFIG using an artificial neural network. A DSP (Digital Signal Processor-dSPACE DS1104) was used to experimentally test the proposed strategy. The dynamic performances of the controlled generator are analyzed by using the designed intelligent control strategy in the case of variable wind speeds and upon sudden change of the active power demand. Based on the obtained experimental results, it can be said that the designed intelligent control strategy outperforms traditional methods like direct power (DPC) and vector control in terms of reducing the current harmonics, and torque ripples, and enhancing dynamic response.

No abstract