No abstract

This paper treats a robust adaptive trajectory-tracking control design for a rotorcraft using a high-fidelity math model subject to model uncertainties. In order to control the nonlinear rotorcraft model which shows strong inter-axis coupling and high nonlinearity, incremental backstepping approach with state-dependent control effectiveness matrix is utilized. Since the incremental backstepping control suffers from performance degradation in the presence of control matrix uncertainties due to change of flight conditions, control system robustness is improved by combining the least squares parameter estimator to estimate time varying uncertainties contained in the control effectiveness matrix. Also, by selecting a suitable gain set by investigating the error dynamics, a uniform trajectory-tracking performance over operational flight envelope of the rotorcraft is ensured without resorting to the conventional gain scheduling method. To evaluate the proposed controller, comparative results between IBSC and Adaptive IBSC are provided in this paper with sequential maneuvers from the ADS-33E-PRF. The proposed method shows improved tracking performance under variations in control effective matrix in the flight simulation. Robust and stable parameter estimation is also guaranteed due to the implementation of the DF-RLS algorithm for the least squares estimator.

This paper investigates the adaptive incremental backstepping sliding mode control for the rotorcraft trajectory-tracking control problem to enhance the robustness to the matched uncertainty in the model. First, the incremental dynamics is used for the control design to exclude the adverse effect of the mismatched model uncertainties on the trajectory-tracking performance. Secondly, the sliding-mode control strategy is adopted in the second design stage of the backstepping controller, and the effect of switching gains on the controller robustness is thoroughly studied using the rotorcraft model with different levels of the matched uncertainties. To clarify the robustness enhancement using the adaptive selection of switching gains, this paper chooses three different control structures consisting of the traditional backstepping control and two backstepping sliding mode controls with the fixed or adaptively adjusted switching gains. These control designs are applied to the trajectory-tracking control for the helical-turn maneuver of the Bo-105 helicopter to compare their relative robustness to the matched uncertainties. The results prove that adaptive incremental backstepping sliding mode control shows much higher robustness than other two designs, and the controller even with the fixed switching gains can be used to improve the robustness of the pure backstepping control design. Therefore, the present adaptive incremental backstepping sliding mode control is effectively applicable with the rotorcraft model which typically contains many different sources of both matched and mismatched uncertainties.

This paper investigates an adaptive backstepping control based on the immersion-and-invariance (I&I) method for a rotorcraft’s trajectory-tracking control problem. To effectively cope with both parametric uncertainties and external disturbances affecting all forces and moments of a rotorcraft, the I&I-based disturbance observer is designed and combined with an adaptive backstepping controller. During the design process, a simple form of the observer structure is suggested, and the performance of the observer is analyzed using a candidate Lyapunov function. Then, the closed-loop stability of the adaptive controller is analyzed for both time-invariant and time-varying disturbances. Additionally, the tuning function-based adaptive backstepping controller is designed and used to investigate the outperformance achievable with the proposed method. Finally, comparative simulation results using a high-fidelity rotorcraft math model is provided to show the effectiveness of the proposed strategy.