No abstract

No abstract

The National Ignition Facility (NIF) requires diagnostics to analyze high-energy density physics experiments. As a core NIF early light diagnostic, this system measures shock velocities, shock breakout times, and shock emission of targets with sizes from 1 to 5 mm. A 659.5 nm VISAR probe laser illuminates the target. An 8-inch-diameter fused silica triplet lens collects light at f/3 inside the 33-foot-diameter vacuum chamber. The optical relay sends the image out an equatorial port, through a 2-inch-thick vacuum window, and into two VISAR (Velocity Interferometer System for Any Reflector) interferometers. Both streak cameras and CCD cameras record the images. Total track is 75 feet. The front end of the optical relay can be temporarily removed from the equatorial port, allowing for other experimenters to use that port. The first triplet can be no closer than 500 mm from the target chamber center and is protected from debris by a blast window that is replaced after every event. Along with special coatings on the mirrors, cutoff filters reject the NIF drive laser wavelengths and pass a band of wavelengths for VISAR, for passive shock breakout light, or for thermal imaging light (bypassing the interferometers). Finite Element Analysis was performed on all mounting structures. All optical lenses are on kinematic mounts, so that the pointing accuracy of the optical axis can be checked. A two-color laser alignment scheme is discussed.

No abstract

Thermal imaging is an important, though challenging, diagnostic for shockwave experiments. Shock-compressed materials undergo transient temperature changes that cannot be recorded with standard (greater than ms response time) infrared detectors. A further complication arises when optical elements near the experiment are destroyed. We have designed a thermal-imaging system for studying shock temperatures produced inside a gas gun at Sandia National Laboratories. Inexpensive, diamond-turned, parabolic mirrors relay an image of the shocked target to the exterior of the gas gun chamber through a sapphire vacuum port. The 3000-5000-nm portion of this image is directed to an infrared camera which acquires a snapshot of the target with a minimum exposure time of 150 ns. A special mask is inserted at the last intermediate image plane, to provide dynamic thermal background recording during the event. Other wavelength bands of this image are split into high-speed detectors operating at 900-1700 nm, and at 1700-3000 nm for timeresolved pyrometry measurements. This system incorporates 90-degree, off-axis parabolic mirrors, which can collect low f/# light over a broad spectral range, for high-speed imaging. Matched mirror pairs must be used so that aberrations cancel. To eliminate image plane tilt, proper tip-to-tip orientation of the parabolic mirrors is required. If one parabolic mirror is rotated 180 degrees about the optical axis connecting the pair of parabolic mirrors, the resulting image is tilted by 60 degrees. Different focal-length mirrors cannot be used to magnify the image without substantially sacrificing image quality. This paper analyzes performance and aberrations of this imaging diagnostic.