In this study, arc stud welding process was employed for welding AISI 316 stainless steel studs to AISI 1060 high carbon steel plates. A disc of Ni powder prepared and used as a buffering layer to enhance the properties of welding area. Optical and scanning electron microscopy were used to examine the microstructure. Energy-Dispersive X-ray (EDX) and X-Ray Diffraction (XRD) tests were performed to analyse and identify elements and phases, respectively in the weld region. The results observed that Ni powder prevented the direct contact between the dissimilar base metals. Existing of Ni altered the microstructure of the weld zone and encouraged dendritic type over cellular. Hardness reduced in the weld region from 600 HV to 200 HV due to the effect of Ni powder which prevented the formation of brittle Fe-Cr phase.
Purpose: This paper aims to investigate the impact of arc stud welding (ASW) process
parameters on the microstructure and mechanical properties of AISI 316L stainless steel
stud/plate joint.
Design/methodology/approach: The weld performed using ASW machine. The influence
of welding current and time on solidification mode and microstructure of the fusion zone
(FZ) was investigated using optical microscope and scanning electron microscope (SEM).
Microhardness and torque strength tests were utilised to evaluate the mechanical properties
of the welding joint.
Findings: The results showed that different solidification modes and microstructure
were developed in the FZ. At 400 and 600 A welding currents with 0.2 s welding time, FZ
microstructure characterised with single phase austenite or austenite as a primary phase.
While with 800 A and 0.2 s, the microstructure consisted of ferrite as a primary phase.
Highest hardness and maximum torque strength were recorded with 800 A. Solidification
cracking was detected in the FZ at fully austenitic microstructure region.
Research limitations/implications: The main challenge in this work was how to avoid
the arc blow phenomenon, which is necessary to generate above 300 A. The formation of
arc blow can affect negatively on mechanical and metallurgical properties of the weld.
Practical implications: ASW of austenitic stainless steel are used in multiple industrial
sectors such as heat exchangers, boilers, furnace, exhaust of nuclear power plant. Thus,
controlling of solidification modes plays an important role in enhancing weld properties.
Originality/value: Study the influence of welding current and time of ASW process on
solidification modes, microstructure and mechanical properties of AISI 316 austenitic
stainless steel stud/plate joint.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.