No abstract

a b s t r a c tThis article presents dryout results of propane in single vertical circular minichannels made of stainless steel with internal diameters of 1.70 mm and 1.224 mm. The heat flux is increased in steps up to occurrence of dryout. The effects of different parameters such as mass flux, saturation temperature, vapour quality and internal diameter on the dryout are investigated. The results show that the dryout heat flux increases with the increase in mass velocity, with the decrease of vapour quality and with the increase of internal diameter. Almost no effect of saturation temperature on dryout heat flux is observed. Generalised CHF correlations developed for macro and micro scale from the literature are also compared with the experimental results.

No abstract

a b s t r a c tTwo phase pressure drops were measured for ammonia at a wide range of test conditions in two sizes of vertical mini channels. The test sections were made of stainless steel (AISI 316) tubes with internal diameter of 1.70 mm and 1.224 mm and a uniformly heated length of 245 mm. Experiments were conducted at three saturation temperatures of 23 C, 33 C and 43 C, the heat flux ranging from 15 to 355 kW/m 2 and the mass flux ranging from 100 to 500 kg/m 2 s. The effect of the heat flux, the mass flux, the vapour quality, the saturation temperature and the internal diameter on the two phase pressure drop are presented in this article. Some generalized two phase pressure drop correlations suggested for macro and micro scale channels are examined by comparing them with our experimental data. None of the examined correlations agreed well with the test data. A new correlation (modified form of Tran et al. correlation) is proposed which is able to predict the experimental data with MAD of 16% and 86% of the data is within AE30% range.

This paper presents the visualization results obtained for an experimental study ofR134a during flow boiling in a horizontal microchannel. The microchannel used was a fused silica tube having an internal diameter of 781 um, a heated length of 191 mm, and was coated with a thin, transparent, and electrically conductive layer of indium-tin-oxide (ITO) on the outer surface. The operating parameters during the experiments were: mass flux ¡00^00 kglm^ s, heat flux 5-45 kWI m^, saturation temperatures 25 and 30° C, corresponding to saturation pressures of 6.65 bar and 7.70 bar and reduced pressures of 0.163 and 0.189, respectively. A high speed camera with a close up lens was used to capture the flow patterns that evolved along the channel. Flow pattern maps are presented in terms of the supeiftcial gas and liquid velocity and in terms of the Reynolds number and vapor quality plots. The results are compared with some flow pattern maps for conventional and micro scale channels available in the literature. Rigorous boiling and increased coalescence rates were observed with an increase in the heat flux.