Buildings contribute more than 40% of world energy consumption, so it is feared that it will cause energy problems in thefuture, especially in the construction sector. One solution to reducing this problem is by analyzing energy use at the initialdesign stage and utilizing solar energy as one of the solar power plants (PLTS) in office buildings. To analyze the use ofenergy in buildings, Building Information Modeling (BIM) was used. The purpose of this research is to analyze the annualenergy level of office buildings in Palembang using BIM software, namely Autodesk Revit. The number of solar panels aswell as the amount of energy were also identified using web-based software (HelioScope) resulting the economic feasibilityas indicated by the installation of solar panels as a component of PV mini-grid. The results showed that the use of BIMtechnology in analyzing building energy can provide a detailed description of the building model at the design stage. Revitanalysis indicates that the building consumed electrical energy per year for about 3,647,713 kWh with a roof area of 1,657m2. In addition, based on the HelioScope analysis, the use of renewable energy from the installation of PLTS was 152,900kWh/year. Meanwhile, for economic feasibility analysis, the installation of PLTS in office buildings can provide a positive NetPresent Value (NPV), indicating a feasible project.

[IN] Ruas Jalan Soekarno-Hatta kota Palembang merupakan Jalan Nasional yang berkelas Jalan Arteri Primer yang dilapisi dengan perkerasan lentur (flexible pavement). Jalan yang diamati dari Simpang Empat fly over Tanjung Api-Api hingga Simpang Empat Macan Lindungan  memiliki panjang 8,45 kilometer. Saat itu kota Palembang sedang menggenjot pembangunan proyek venue dan LRT guna menyukseskan perhelatan olahraga Asian games. Ruas Jalan Soekarno-Hatta Palembang digunakan sebagai aktivitas lalulintas kendaraan proyek akibatnya terjadi peningkatan volume kendaraan dan kepadatan lalulintas yang tak terkendali, sehingga dikhawatirkan berdampak pada kualitas perkerasan jalan tersebut. Tujuan Penelitian ini adalah untuk mengidentifikasi kerusakan permukaan perkerasan lentur jalan dengan menggunakan metode PCI (Pavement Condition Index). Survei metode PCI dilakukan secara visual berdasarkan jenis dan tingkat kerusakan jalan dengan penilaian numerik antara nol (gagal) hingga seratus (sempurna). Hasil identifikasi kerusakan permukaan jalan menunjukkan bahwa kerusakan yang terjadi pada ruas jalan tersebut sebanyak tujuh jenis yaitu kegemukan, amblas, keriting, pelepasan butiran, retak kulit buaya serta tonjolan dan lengkungan. Jumlah unit sampel segmen jalan yang mengalami kerusakan sebanyak 17 unit sampel dari total yang diteliti 68 unit sampel dengan nilai rata-rata PCI didapatkan sebesar 95,655 artinya jalan tersebut dengan kondisi “Sempurna”. Meskipun ruas jalan tersebut tergolong sempurna secara kondisi, akan tetapi masih terdapat kerusakan yang terjadi pada ruas tersebut, untuk itu perlu dilakukan pemeliharaan jalan pada unit sampel yang rusak sehingga dapat menjaga kualitas serta umur layak ruas jalan tersebut. [EN] The Soekarno-Hatta Road section of the city of Palembang is a classy National Road of the Primary Arterial Road that is equipped with flexible pavement. The road chosen from Simpang Empat fly over Tanjung Api-Api to Simpang Empat Macan Lindungan has a length of 8.45 kilometers. At present the city of Palembang is being promoted by a construction site and LRT project to succeed in the sporting event Asian games. The Soekarno-Hatta Palembang Road Section is used as a project vehicle traffic activity resulting in an increase in vehicle volume and uncontrolled traffic density, so it is feared to have an impact on the quality of the pavement. The purpose of this study was to identification road surface damage using the PCI (Pavement Condition Index) method. PCI survey method is carried out  visually based on the type and severity level of road damage with a numerical rating between zero (failed) to one hundred (excellent). The results of identification of road surface damage showed that there were 7 types of damage that occurred on the road section namely bleeding, depression, corrugation, weathering and raveling, potholes, alligator cracking, and bumps and sags. The number of sample units of the road segment that suffered damage as many as 17 sample units of the total studied by 68 units samples with an average value of PCI obtained by 95,655, This means that the road with the condition "excellent". Even though the road is classified as excellent, but damage is still needed in that section, for this reason it is necessary to maintain the road on the damaged sample unit so that it can be used at a reasonable quality for the life of the road section.