A magnetic nanoparticle catalyst was readily prepared from inexpensive starting materials which catalyzed the Hantzsch reaction. High catalytic activity and ease of recovery from the reaction mixture using an external magnet, and several reuse times without significant losses in performance are additional eco-friendly attributes of this catalytic system.

Surface functionalization of magnetic particles is an elegant way to bridge the gap between heterogeneous and homogeneous catalysis. The introduction of magnetic particles (MPs) in a variety of solid matrices allows the combination of well‐known procedures for catalyst heterogenization with techniques for magnetic separation. We have conveniently loaded sulfonic acid groups on magnetic particles supports in which chlorosulfonic acid is used as sulfonating agent. The main targets are room temperature, solvent‐free conditions, rapid (immediately) and easy immobilization technique, and low cost precursors for the preparation of highly active and stable MPs with high densities of functional groups. The inorganic, magnetic, solid acid catalyst was characterized via Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), dynamic light scattering (DLS), vibrating sample magnetometer (VSM) and titration. The catalyst is active for the Hantzsch reaction and the products are isolated in high to excellent yields (90–98%). Supporting this acid catalyst on magnetic particles offers a simple and non‐energy‐intensive method for recovery and reuse of the catalyst by applying an external magnet. Isolated catalysts were reused for new rounds of reactions without significant loss of their catalytic activity.

Abstract:The adsorption of iodine onto silica coated magnetite nanoparticles (im-SCMNPs) that modified with imidazole was investigated for removal of high concentrations of iodine from wastewater. Modified silica magnetite nanoparticles showed high efficiency in removing iodine from wastewater samples. The optimum pH for iodine removal was 7.0-8.0. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. The size of the produced magnetite nanoparticles was determined by X-ray diffraction analysis and scanning electron microscopy. Synthesized magnetite nanoparticles showed the high adsorption capacity and would be a good method to increase adsorption efficiency for the removal of iodine in a wastewater treatment process. The Langmuir adsorption capacity (qmax) was found to be 140.84 mg/g of the adsorbent.

No abstract