Detailed information regarding the alloy deposition/ dealloying and fabrication steps, the energy dispersive X-ray spectral characterization, histology on chronically implanted mice and characterization of explanted electrodes, electrochemical impedance spectroscopy and their small signal components, sterilization effects of autoclave, ethylene oxide, and sterrad, on impedance distribution, comparison of surface and depth recorded single units and extracted composite receptive fields in songbird experiments, and comparison of recordings using PtNR devices and NeuroNexus ECoG Pt electrodes on NHP and corresponding power-frequency plots (PDF)

In this study, we present a 4-channel intracortical glassy carbon (GC) microelectrode array on a flexible substrate for the simultaneous in vivo neural activity recording and dopamine (DA) concentration measurement at four different brain locations (220μm vertical spacing). The ability of GC microelectrodes to detect DA was firstly assessed in vitro in phosphate-buffered saline solution and then validated in vivo measuring spontaneous DA concentration in the Striatum of European Starling songbird through fast scan cyclic voltammetry (FSCV). The capability of GC microelectrode arrays and commercial penetrating metal microelectrode arrays to record neural activity from the Caudomedial Neostriatum of European starling songbird was compared. Preliminary results demonstrated the ability of GC microelectrodes in detecting neurotransmitters release and recording neural activity in vivo. GC microelectrodes array may, therefore, offer a new opportunity to understand the intimate relations linking electrophysiological parameters with neurotransmitters release.

In this study, the investigation of surface-treatment of chemically inert graphitic carbon microelectrodes (derived from pyrolyzed photoresist polymer) for improving their attachment chemistry with DNA molecular wires and ropes as part of a bionanoelectronics platform is reported. Polymer microelectrodes were fabricated on a silicon wafer using standard negative lithography procedures with negative-tone photoresist. These microelectrode structures were then pyrolyzed and converted to a form of conductive carbon that is referred to as PP (pyrolyzed polymer) carbon throughout this paper. Functionalization of the resulting pyrolyzed structures was done using nitric, sulfuric, 4-amino benzoic acids (4-ABA), and oxygen plasma etching and the surface modifications confirmed with Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and electron dispersion x-ray spectroscopy (EDS). Post surface-treatment analysis of microelectrodes with FTIR and Raman spectroscopy showed signature peaks characteristics of carboxyl functional groups while EDS showed an increase in oxygen content in the surface-treatment procedures (except 4-ABA) indicating an increase in carboxyl functional group. These functional groups form the basis for peptide bond with aminated oligonucleotides that in turn could be used as molecular wires and interconnects in a bionanoelectronics platform. Post-pyrolysis analysis using EDS showed relatively higher oxygen concentrations at the edges and location of defects compared to other locations on these microelectrodes. In addition, electrochemical impedance measurements showed metal-like behavior of PP carbon with high conductivity (|Z| <1 KΩ) and no detectable detrimental effect of oxygen plasma surface-treatment on electrical characteristic. In general, characterization results—taken together—indicated that oxygen plasma surface-treatment produced more reliable, less damaging, and consistently repeatable generation of carboxyl functional groups than diazonium salt and strong acid treatments.

High-fidelity measurements of neural activity can enable advancements in our understanding of the neural basis of complex behaviors such as speech, audition, and language, and are critical for developing neural prostheses that address impairments to these abilities due to disease or injury. We develop a novel high resolution, thin-film micro-electrocorticography (micro-ECoG) array that enables highfidelity surface measurements of neural activity from songbirds, a well-established animal model for studying speech behavior. With this device, we provide the first demonstration of sensory-evoked modulation of surface-recorded single unit responses. We establish that single unit activity is consistently sensed from micro-ECoG electrodes over the surface of sensorimotor nucleus HVC (used as a proper name) in anesthetized European starlings, and validate responses with correlated firing in single units recorded simultaneously at surface and depth. The results establish a platform for high-fidelity recording from the surface of subcortical structures that will accelerate neurophysiological studies, and development of novel electrode arrays and neural prostheses.

In this study, the investigation of attachment of DNA molecular wires and ropes to high aspect-ratio three-dimensional (3D) metal microelectrodes and their subsequent electrical characterization as part of a bionanoelectronics platform is reported. The 3-D microelectrode architecture consists of mainly high aspect-ratio microelectrode structures (75 μm height and above) patterned from relatively thick layers of negative tone photoresist and covered by sputtered gold on their top surface. DNA attachments on 3-D microelectrode structures was demonstrated using oligonucleotide-DNA self-assembly and thiol-gold covalent bonding. Further, DC and AC electrical characterization of double-stranded λ-DNA molecular wires in a dry environment and suspended between high aspect-ratio 3D microelectrodes 75 μm away from the substrate (to heights unprecedented so far in the literature which thereby eliminate interference of substrate) is presented. Electrical characterizations based on I-V and AC impedance analysis of several repeatable data points of attachment with varying λ-DNA concentration (500 ng/μL to 1.5 ng/μL) showed measurable and significant conductivity of λ-DNA molecular wires with some band-gap; thereby establishing it as semi-conductor at low-frequencies (<100 Hz) and a very good conductor at high-frequencies (∼1 MHz). We believe that the research presented here represents a significant departure from previous studies and makes unique contributions through (i) more accurate direct conductivity measurement of DNA molecular wires facilitated by suspension of the DNA away from the substrate, and (ii) AC impedance measurement of DNA molecular wires in dry-state attachment (relevant for long-term viability studies) that suggest metal-type low impedance at high-frequencies. The significant conductivity of λ-DNA molecular wires (similar to metals) observed at high-frequencies (|Z| < 5 KΩ) opens up substantial opportunities.