Seismic evaluation of existing structures is based on determining the damage likely to occur during the lifetime of these structures due to earthquake ground motion excitation. However, there is not a consensus about the acceptable level of seismic damage, the expected lifetime of these structures, and the seismic hazard level(s) to evaluate the structures at. This paper presents a methodology for a parametric calculation of the seismic collapse risk of an existing Reinforced Concrete (RC) frame building based on its seismic code compliance, quantified by a dimensionless metric. This metric, defined as compliance factor, compares the seismic capacity of an existing structure with the seismic demand for a new structure at a predetermined hazard level. The inelastic seismic behavior of four models of the RC frame building of varying compliance was analytically investigated in this study to demonstrate the novel methodology. The four models of the RC building were chosen to represent existing RC frame structures designed and constructed before the introduction of modern seismic code provisions. These four building models were excited by a group of earthquake ground motion excitations using Incremental Dynamic Analysis. The collapse probabilities of the four building models, representing varying values of seismic code compliance, were determined for two different locations corresponding to regions of moderate and high seismic hazard, thus laying the basis for the compliance-based estimation of the seismic collapse risk of existing structures.

The seismic evaluation of existing structures is based on the determination of the damage likely to occur during the lifetime of these structures due to earthquake ground motion excitation. However, there is not a consensus about the acceptable level of seismic damage, the expected lifetime of these structures, and the seismic hazard level(s) to evaluate the structures at. This paper presents a methodology for the parametric determination of the seismic collapse risk of an existing Reinforced Concrete (RC) frame building based on its seismic code compliance, quantified by a dimensionless metric. This metric, defined as compliance factor, compares the seismic capacity of an existing structure with the seismic demand for a new structure at a predetermined hazard level. The inelastic seismic behavior of four models of the RC frame building of varying compliance was analytically investigated in this study to demonstrate the implementation of the novel methodology. The four models of the RC building were chosen to represent existing RC frame structures, designed and constructed before the introduction of the modern seismic code provisions. These four building models were excited by a group of earthquake ground motion excitations using Incremental Dynamic Analysis (IDA). The collapse probability of the four models of the RC building representing varying values of seismic code compliance was determined for two different locations corresponding to regions of moderate and high seismic hazard, thus laying the basis for the compliance-based estimation of the seismic collapse risk of existing structures.