There is a need for a simple, accurate soil density measurement system that does not require extensive calibration or significant health and safety measures for compaction quality control. This research describes the invention of a photogrammetric technique for obtaining the volume of an excavated hole in soil. This procedure requires a series of 8 to 16 digital photographs with a standard digital camera around the perimeter of an excavated hole with a reference scale in the scene. Algorithms convert the digital photographs into a colorized three-dimensional point cloud, which is automatically rotated into a plan view and displayed via the Matlab graphical user interface. Once the reference scale dimensions are input, the volume of the hole is calculated via a user selected ground plane. Once the mass of the excavated soil is input, the wet density of the soil is calculated by dividing by the volume of the hole. This procedure has been validated against both the nuclear density gauge and the sand cone apparatus and found to be equivalent in accuracy to both. This procedure enables soil density determination within 15 min with no replacement material, no specific excavated hole dimension, and no safety or health risks.
This work was performed to assist the U.S. Army Corps of Engineers, Omaha and Kansas City Districts, in quantifying sediment bed load and suspended load at several sites on the Missouri River for the purpose of defining sediment-discharge rating curves and for possible parameterization of bed-load transport equations. Seven sites were selected, and all sites were surveyed three times, separated by at least 4 weeks (or 20% flow difference) between surveys. Multi-beam, acoustic Doppler current profiler, suspended sediment, and bed material samples were collected for each site visit. As requested by the Districts, all units are in English units. In addition to quantifying all the intended data types listed above, bed-load transport values were computed for all sites and all trips using the Integrated Section Surface Difference Over Time version 2 (ISSDOTv2) method and compared with the Meyer-Peter Mueller and Einstein bed-load transport functions.The study provides a complete sediment picture (bed load, suspended bedmaterial load, and wash load) over a 630-mile reach of a large sand bed river, with seven sites representing increasingly larger flows along the river length. The data set will be very useful for additional studies. DISCLAIMER:The contents of this report are not to be used for advertising, publication, or promotional purposes. Citation of trade names does not constitute an official endorsement or approval of the use of such commercial products. All product names and trademarks cited are the property of their respective owners. The findings of this report are not to be construed as an official Department of the Army position unless so designated by other authorized documents.
This research developed an automated software technique for identifying type, size, and location of man-made airfield damage including craters, spalls, and camouflets from a digitized three-dimensional point cloud of the airfield surface. Point clouds were initially generated from Light Detection and Ranging (LiDAR) sensors mounted on elevated lifts to simulate aerial data collection and, later, an actual unmanned aerial system. LiDAR data provided a high-resolution, globally positioned, and dimensionally scaled point cloud exported in a LAS file format that was automatically retrieved and processed using volumetric detection algorithms developed in the MATLAB software environment. Developed MATLAB algorithms used a three-stage filling technique to identify the boundaries of craters first, then spalls, then camouflets, and scaled their sizes based on the greatest pointwise extents. All pavement damages and their locations were saved as shapefiles and uploaded into the GeoExPT processing environment for visualization and quality control. This technique requires no user input between data collection and GeoExPT visualization, allowing for a completely automated software analysis with all filters and data processing hidden from the user.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.