To date, copper is the only monometallic catalyst that can electrochemically reduce CO2 into high value and energy‐dense products, such as hydrocarbons and alcohols. In recent years, great efforts have been directed towards understanding how its nanoscale structure affects activity and selectivity for the electrochemical CO2 reduction reaction (CO2RR). Furthermore, many attempts have been made to improve these two properties. Nevertheless, to advance towards applied systems, the stability of the catalysts during electrolysis is of great significance. This aspect, however, remains less investigated and discussed across the CO2RR literature. In this Minireview, the recent progress on understanding the stability of copper‐based catalysts is summarized, along with the very few proposed degradation mechanisms. Finally, our perspective on the topic is given.
The foreseeable worldwide energy and environmental challenges demand renewable alternative sources, energy conversion, and storage technologies. Therefore, electrochemical energy conversion devices like fuel cells, electrolyzes, and supercapacitors along with photoelectrochemical devices and batteries have high potential to become increasingly important in the near future. Catalytic performance in electrochemical energy conversion results from the tailored properties of complex nanometer-sized metal and metal oxide particles, as well as support nanostructures. Exposed facets, surface defects, and other structural and compositional features of the catalyst nanoparticles affect the electrocatalytic performance to varying degrees. The characterization of the nanometer-size and atomic regime of electrocatalysts and its evolution over time are therefore paramount for an improved understanding and significant optimization of such important technologies like electrolyzers or fuel cells. Transmission electron microscopy (TEM) and scanning transmission electron microscope (STEM) are to a great extent nondestructive characterization tools that provide structural, morphological, and compositional information with nanoscale or even atomic resolution. Due to recent marked advancement in electron microscopy equipment such as aberration corrections and monochromators, such insightful information is now accessible in many institutions around the world and provides huge benefit to everyone using electron microscopy characterization in general. Classical ex situ TEM characterization of random catalyst locations however suffers from two limitations regarding catalysis. First, the necessary low operation pressures in the range of 10(-6) to 10(-9) mbar for TEM are not in line with typical reaction conditions, especially considering electrocatalytic solid-liquid interfaces, so that the active state cannot be assessed. Second, and somewhat related, is the lack of time resolution for the evaluation of alterations of the usually highly heterogeneous nanomaterials. Two methods offer a solution to these shortcomings, namely, identical location TEM (IL-TEM) and electrochemical in situ liquid TEM. The former is already well established and has delivered novel insights particularly into degradation processes; however, characterization is still performed in vacuum. The latter circumvents this issue by using dedicated in situ TEM holders but introduces extremely demanding technical challenges. Although the introduction of revolutionizing thin SiN window cells, which elegantly confine the specimen from vacuum, has allowed demonstration of the potential of the in situ approach, the reproducibility and data interpretation is still limited predominately due to the strong interaction of the electron beam with the supporting electrolyte and electrode material. Because of the importance of understanding the nanoelectrochemical structure-function relationship, this Account aims to convey a timely perspective on the opportunities and particularly the ch...
Iridium-based particles, regarded as the most promising proton exchange membrane electrolyzer electrocatalysts, were investigated by transmission electron microscopy and by coupling of an electrochemical flow cell (EFC) with online inductively coupled plasma mass spectrometry. Additionally, studies using a thin-film rotating disc electrode, identical location transmission and scanning electron microscopy, as well as X-ray absorption spectroscopy have been performed. Extremely sensitive online time-and potential-resolved electrochemical dissolution profiles revealed that Ir particles dissolve well below oxygen evolution reaction (OER) potentials, presumably induced by Ir surface oxidation and reduction processes, also referred to as transient dissolution. Overall, thermally prepared rutile-type IrO particles are substantially more stable and less active in comparison to as-prepared metallic and electrochemically pretreated (E-Ir) analogues. Interestingly, under OER-relevant conditions, E-Ir particles exhibit superior stability and activity owing to the altered corrosion mechanism, where the formation of unstable Ir(>IV) species is hindered. Due to the enhanced and lasting OER performance, electrochemically pre-oxidized E-Ir particles may be considered as the electrocatalyst of choice for an improved low-temperature electrochemical hydrogen production device, namely a proton exchange membrane electrolyzer.
One of the most important practical issues in low‐temperature fuel‐cell catalyst degradation is platinum dissolution. According to the literature, it initiates at 0.6–0.9 VRHE, whereas previous time‐ and potential‐resolved inductively coupled plasma mass spectrometry (ICP–MS) experiments, however, revealed dissolution onset at only 1.05 VRHE. In this manuscript, the apparent discrepancy is addressed by investigating bulk and nanoparticulated catalysts. It is shown that, given enough time for accumulation, traces of platinum can be detected at potentials as low as 0.85 VRHE. At these low potentials, anodic dissolution is the dominant process, whereas, at more positive potentials, more platinum dissolves during the oxide reduction after accumulation. Interestingly, the potential and time dissolution dependence is similar for both types of electrode. Dissolution processes are discussed with relevance to fuel‐cell operation and plausible dissolution mechanisms are considered.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.