No abstract

In this study, dye-sensitized solar cells (DSSCs) has been assembled with poly(1-vinylpyrrolidone-co-vinyl acetate) (P(VP-co-VAc)) gel polymer electrolytes (GPEs) which have been incorporated with binary salt and an ionic liquid. The potential of this combination was studied and reported. The binary salt system GPEs was having ionic conductivity and power conversion efficiency (PCE) that could reach up to 1.90 × 10−3 S cm−1 and 5.53%, respectively. Interestingly, upon the addition of the ionic liquid, MPII into the binary salt system the ionic conductivity and PCE had risen steadily up to 4.09 × 10−3 S cm−1 and 5.94%, respectively. In order to know more about this phenomenon, the electrochemical impedance studies (EIS) of the GPE samples have been done and reported. Fourier transform infrared studies (FTIR) and thermogravimetric analysis (TGA) have also been studied to understand more on the structural and thermal properties of the GPEs. The Nyquist plot and Bodes plot studies have been done in order to understand the electrochemical properties of the GPE based DSSCs and Tafel polarization studies were done to determine the electrocatalytic activity of the GPE samples.

Solid terpolymer electrolytes (STEs) consist of different ratios of poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate) (PVBVA) and bis(trifluoromethane) sulfonamide lithium salt (LiTFSi) were prepared and the ionic conductivity of the prepared STEs was evaluated. The optimized STE (denoted as STE 20) was further doped with various amount of tetraglyme (10, 20, and 30 wt % and denoted as G10, G20, and G30, respectively). G20 enhanced the ionic conductivity from 6.22 (for STE 20) to 21.9 µS cm−1. This enhancement is due to the presence of abundant oxygen‐containing functional group in tetraglyme that provides more charge carrier mobility in the polymer matrix. The structure and complexation of the materials are authenticated via X‐ray diffraction and Fourier transform infrared spectroscopy analysis. The performance of electric double layer capacitors based on activated carbon (AC) fabricated with STE 20 (AC/STE 20/AC) and G20 (AC/G 20/AC) were studied via cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. AC/G 20/AC achieved the maximum specific capacitance of 10.20 F/g [which is higher than AC/STE 20/AC (9.30 F/g)] with 75% of specific capacitance retention after 1500 cycles. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45902.