Bone cement has found extensive usage in joint arthroplasty over the last 50 years; still, the development of bone cement with essential properties such as high fatigue resistance, lower exothermic temperature, and bioactivity has been an unsolved problem. In our present work, we have addressed all of the mentioned shortcomings of bone cement by reinforcing it with graphene (GR), graphene oxide (GO), and surface-modified amino graphene (AG) fillers. These nanocomposites have shown hypsochromic shifts, suggesting strong interactions between the filler material and the polymer matrix. AG-based nanohybrids have shown greater osteointegration and lower cytotoxicity compared to other nanohybrids as well as pristine bone cement. They have also reduced oxidative stress on cells, resulting in calcification within 20 days of the implantation of nanohybrids into the rabbits. They have significantly reduced the exothermic curing temperature to body temperature and increased the setting time to facilitate practitioners, suggesting that reaction temperature and settling time can be dynamically controlled by varying the concentration of the filler. Thermal stability and enhanced mechanical properties have been achieved in nanohybrids vis-à-vis pure bone cement. Thus, this newly developed nanocomposite can create natural bonding with bone tissues for improved bioactivity, longer sustainability, and better strength in the prosthesis.

Poly(methyl methacrylate)-based bone cement and layered double hydroxide (LDH) nanocomposites have been used as a grouting material for total joint arthroplasty. Few weight percentage of nanoLDH was uniformly dispersed in the bone cement matrix to have adequate interaction with matrix polymer. Mechanical strength, stiffness, toughness, and fatigue resistance of the nanocomposites are found to be higher than that of pure bone cement. Nanocomposites are thermally stable as compared to pristine bone cement. Direct mixing of the nanoLDH without any organic solvent makes these nanocomposites biocompatible. Biocompatibility was evaluated and compared with that of commercial bone cement by measuring hydrophilic nature, hemolysis assay, thrombosis assay, and deposition of apatite in simulated body fluid immersion. Finally, the viability of human osteoblast cells on the above developed nanocomposites was testified for actual biocompatibility. The experiment showed better cell growth in nanocomposites as compared to pure bone cement. Thus, these nanocomposites are found to be better grouting material than bone cement.

Contact glow-discharge electrolysis (CGDE) is an unconventional electrolytic phenomenon in which a plasma is sustained by a direct current (dc) glow-discharge between an electrode and the liquid electrolyte around it. A remarkable feature of CGDE is highly nonfaradaic chemical effects at the glow-discharge electrode. During anodic CGDE of an aqueous electrolyte, non-Faradaic yields originate mainly from reactions triggered by H • and OH • radicals generated in high local concentrations near the anodic plasma/liquid electrolyte interface during the process. The radical-generating potentiality of anodic CGDE was explored for the polymerization of acrylamide in aqueous media. The percentage of monomer conversion, rate of polymerization, charge efficiency, and viscometric average molar mass of the polymers produced were measured as functions of the quantities of electricity passed. The charge efficiency of the polymerization of acrylamide by anodic CGDE was at least 1 order of magnitude higher than that of ordinary electrochemically initiated polymerization.

Biodegradable poly(lactic acid) (PLA) is widely used to fabricate 3D scaffolds for tissue regeneration. However, PLA lacks cell adhering functional moieties, which limit its successful application in tissue engineering. Herein, we have tailored the cell adhesive properties of star shaped poly(d,l-lactide) (ss-PDLLA) by grafting gelatin to their 4 arms. Grafting of gelatin on PDLLA backbone was confirmed by H NMR and FTIR. The synthesized star shaped poly(d,l-lactide)-b-gelatin (ss-pLG) exhibited enhanced wettability and protein adsorption. The modification also facilitated better cell adhesion and proliferation on their respective polymer coated 2D substrates, compared to their respective unmodified ss-PDLLA. Further, 3D scaffolds were fabricated from gelatin grafted and unmodified polymers. The fabricated scaffolds were shown to be cytocompatible to 3T3-L1 cells and hemocompatible to red blood cells (RBCs). Cell proliferation was increased up to 2.5-fold in ss-pLG scaffolds compared to ss-PDLLA scaffolds. Furthermore, a significant increase in cell number reveals a high degree of infiltration of cells into the scaffolds, forming a viable and healthy 3D interconnected cell community. In addition to that, burst release of docetaxal (DTX) was observed from ss-pLG scaffolds. Hence, this new system of grafting polymers followed by fabricating 3D scaffolds could be utilized as a successful approach in a variety of applications where cell-containing depots are used.

No abstract