Statistically lower flow rates were observed for 70% of ENFit devices relative to their legacy counterparts. We estimate that 30% of the differences may be noticeable. In the scenarios studied, lower flow rates (relative to other devices at the same Fr number) arise from energy losses in straight tubing. This difference can be reduced by increasing the tube inner diameters in distal end of ENFit tubes.

In good manufacturing practice (GMP) facilities in the biopharmaceutical industry, chromatography resins are largely underutilized during purification of single drug products during clinical production. Chromatography resins are dedicated to a specific product and disposed of, after only a fraction of their lifetime due to concerns of potential product carryover from one program to another. In this study, we follow a resin lifetime methodology typically used for commercial submissions and apply it to determine the feasibility of purifying different products on a Protein A MabSelect PrismA™ resin. Three distinct monoclonal antibodies were used as model molecules. Column performance was monitored through chromatogram profiles, yield, clearance capability of selected media components, pressure and product quality. A protein carryover study was designed to demonstrate that the column cleaning procedures reduced protein carryover to safe cleanliness levels regardless of multiple product contact cycles and the order in which the mAbs are captured. Data show that up to 90 total cycles (30 cycles per antibody), there was negligible protein carryover and impact on process performance. Product quality was consistent, with the only meaningful trends found for the leached Protein A ligand, without affecting the conclusion of the study. While the study was restricted to three antibodies, the proof of concept for resin reuse was demonstrated.